850 Parts... lots of em!

Post by **bmdubya1198** » 03 Feb 2020, 08:23

Peevarino wrote: 03 Feb 2020, 04:11
Not sure, 6? Was losing daylight last night, and needed to start dinner, I can get a better count later today

Gotcha, just let me know!

Peevarino · Post by **Peevarino** » 03 Feb 2020, 19:46

bmdubya1198 wrote: 03 Feb 2020, 08:23
Peevarino wrote: 03 Feb 2020, 04:11
Not sure, 6? Was losing daylight last night, and needed to start dinner, I can get a better count later today
Gotcha, just let me know!

Had just enough of the yellow ones to get it all installed, but was shy 4 to get it completely clipped in. I could use 6, probably, I’ll be removing it all again at some point to freshen up the finish on the rails and drip molding. Let me know how many of the yellows you’ve got. Thanks, brah

Post by **bmdubya1198** » 03 Feb 2020, 22:36

Peevarino wrote: 03 Feb 2020, 19:46 Had just enough of the yellow ones to get it all installed, but was shy 4 to get it completely clipped in. I could use 6, probably, I’ll be removing it all again at some point to freshen up the finish on the rails and drip molding. Let me know how many of the yellows you’ve got. Thanks, brah

I have 4 that I grabbed today while I was at the junkyard, but I probably have another 1 or 2 with the spare clips I had from when I swapped my molding. I'll double check, I should probably have a couple.

Post by **erikv11** » 04 Feb 2020, 09:13

I've got tons if needed, let me know

Peevarino · Post by **Peevarino** » 15 Feb 2020, 09:01

bmdubya1198 wrote: 03 Feb 2020, 22:36
Peevarino wrote: 03 Feb 2020, 19:46 Had just enough of the yellow ones to get it all installed, but was shy 4 to get it completely clipped in. I could use 6, probably, I’ll be removing it all again at some point to freshen up the finish on the rails and drip molding. Let me know how many of the yellows you’ve got. Thanks, brah
Check yer PMs

I have 4 that I grabbed today while I was at the junkyard, but I probably have another 1 or 2 with the spare clips I had from when I swapped my molding. I'll double check, I should probably have a couple.