Yet another misfire thread - Cylinder 3 - No compression

[kallekula]

I've used Victor Reinz for valve stem seals several times. Never had a problem. E.g. my white S70 has seals that now are 10 years old and roughly 100K miles.
Why do people not like Reinz. Who has had a bad experience with their gasket kits??

[abscate]

Part number 272424, it's in my post already.

Currently 20% off at Volvo of Lisle where blue box parts are already usually cheap, see link above.

Are there different stem seal part numbers for the6mm and 7mm versions ?

[TisMe]

Oof, I almost just ordered those seals assuming they were 6mm. I could be blind but I don't see any reference to their sizing, but abscate it seems you're inferring that kit is 7mm?

[erikv11]

Part number 272424, it's in my post already.

Currently 20% off at Volvo of Lisle where blue box parts are already usually cheap, see link above.

Are there different stem seal part numbers for the6mm and 7mm versions ?

I was trusting the "what this fits" info on the dealer web page. Have only ever used them in P80 engines 95-98.

[abscate]

Use your VIN AND OR engine number to source engine parts. Any of the online Volvo,parts stores will have the engine to get this right.