98 v70 xc

appraiser1 · Post by **appraiser1** » 05 Dec 2022, 18:20

Replaced new radiator- when reinstalling hole in fan shroud the intercooler doesn't line up about 1 1/2 offset- I can't figure out how that difference could be- I attached the intercooler and the radiator in what I thought were the only 4 holes possible-installed from the bottom -attached the 2 side mounting bolts- outlet hose mount is to the left of the hole in the fan shroud as you face the engine. There wasn't much play to be that far off. I watched a couple youtube video's and unless I missed it, seemed like a straightforward reinstall. Would appreciate any advice.
Thanks appraiser1

Post by **abscate** » 05 Dec 2022, 18:28

That’s Blooper #666, last done here by me.

The intercooler is upside down

appraiser1 · Post by **appraiser1** » 06 Dec 2022, 05:38

abscate wrote: ↑05 Dec 2022, 18:28 That’s Blooper #666, last done here by me.

The intercooler is upside down

only takes me an hour and a half to watch 60 minutes

Post by **scot850** » 06 Dec 2022, 08:02

Could be worse. You could be from the UK and astounded how North Americans can make a 1 hour game last 4/5 hours! (Superbowl).

Neil.