2001 xc-70 2.4T Piston compatibility with other years.

lawrencium265 · Post by **lawrencium265** » 12 Apr 2023, 16:28

My #2 piston melted the other day. I pulled the head and the Cylinder wall has melted aluminum on it, but I believe I can clean it off.

I'm Looking at used pistons, but I don't see any for a 2001. I see some for 02'+, 98',99',00' and of course N/A which will not work at all.

Does anybody know if one from a later or earlier year will work? Mine is Marked "D"

Post by **vtl** » 12 Apr 2023, 18:27

Pull it out and measure, I can measure one of mine (B5254T2).

lawrencium265 · Post by **lawrencium265** » 21 Apr 2023, 12:46

Thank you, Mine is 82.4mm Diameter, 50.5mm height between the top edge and the very bottom of the skirt.

Also, both of my skirts are the same. I've seen a different type that has two notches cut out of one skirt.

: IMG_20230421_091635.jpg (234.34 KiB) Viewed 487 times

: IMG_20230421_091712.jpg (165.86 KiB) Viewed 487 times

Post by **vtl** » 21 Apr 2023, 12:57

82.4x50.5 on my 2005 B5254T2 D-letter piston as well. B5254T2 is plentiful.