IPD sale Volvo Parts

2002 V70 XC key cylinder lock

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" cars.
2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R
Post Reply
marvin46917
Posts: 23
Joined: Mon Oct 18, 2010 7:52 pm
Year and Model: 2002 V70 CX
Location: Indiana

2002 V70 XC key cylinder lock

Post by marvin46917 » Thu Nov 18, 2010 7:54 am

I have a 2002 V70 XC when I turn it off the key will not turn all the way until the battery runs down. The lock on the shift lever works, it will not let you shift unless your foot is on the brake. However, the key cylinder acts like it is not in park. Is there another solenoid on the cylinder that would be causing the problem and if so, how do you change it?



RaymanSean
Posts: 246
Joined: Sun Sep 26, 2010 10:12 pm
Year and Model: V70 XC, 2001
Location: columbia, sc

Re: 2002 V70 XC key cylinder lock

Post by RaymanSean » Thu Nov 18, 2010 7:00 pm

Does it do the same thing in neutral? I assume that there are two different solenoids one for the cylinder and one for the shifter. If you can take the key out with the car in neutral then it is the switch for the park position is broken.



otis44
Posts: 274
Joined: Mon Dec 08, 2008 10:54 pm
Year and Model: 2006 S60 T5
Location: London, KY

Re: 2002 V70 XC key cylinder lock

Post by otis44 » Thu Nov 18, 2010 8:57 pm

I don't think there is another solenoid. There is a shift interlock cable that runs from the shifter over to the ignition switch, many times this cable will get stickied up from stuff being spilled down in the console. But, the usual symptom of this is the key won't come out of the ignition when turned off. The cable might be worth checking and the lock cylinders have been known to go bad as well.



twinvolvos
Posts: 4
Joined: Tue Aug 15, 2017 11:23 pm
Year and Model: 2005 v70xc
Location: Twin Falls, ID
United States of America

Re: 2002 V70 XC key cylinder lock

Post by twinvolvos » Thu Jul 12, 2018 1:09 pm

I gave the shifter handle a couple of medium taps with my hand and the key would come out and works fine now. As posted, the cable from the shifter to the steering column can get gunked up and not fully allow the key to turn completely to the off position.



Post Reply

Who is online

Users browsing this forum: No registered users and 26 guests