IPD sale Volvo Parts

2008 xc90 V8 - slow start

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo XC90s. The XC90 proved to be very popular, and very good for Volvo's sales numbers, since its introduction in model year 2003 (North America).
kiwiV8
Posts: 3
Joined: Sun Feb 03, 2019 9:57 pm
Year and Model: 2011 XC90
Location: Auckland
New Zealand

Re: 2008 xc90 V8 - slow start

Post by kiwiV8 » Sun Feb 24, 2019 2:55 pm

just posting an update, at the end I went with original design and got oilite bushes installed back in by an engineering shop as I couldn't wait. You should be able to order some from here

https://www.bowman.co.uk/bearings/oilit ... n-bearings

you'd need one flanged and one plain

sergiy
Posts: 1
Joined: Sat May 17, 2014 12:50 am
Year and Model: 2003 V40
Location: San Jose

Re: 2008 xc90 V8 - slow start

Post by sergiy » Tue Mar 05, 2019 12:09 pm

Hi kiwiV8.

Can you share parts numbers you used? Or sizes of the bearings? You mentioned that one is with the flange - is flange size included in 10mm length?

I would appreciate your info.

Thanks,

Sergiy

kiwiV8
Posts: 3
Joined: Sun Feb 03, 2019 9:57 pm
Year and Model: 2011 XC90
Location: Auckland
New Zealand

Re: 2008 xc90 V8 - slow start

Post by kiwiV8 » Sun Mar 10, 2019 7:43 pm

sure I think I still have the old loose bushing laying around I'll try and take some measurements.

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests