1999 s70 volvo camshaft position sensor location

pbizick · Post by **pbizick** » 16 Mar 2014, 19:50

I need pictures to show where the camshaft position sensor is located on a1999 s70 volvo turbo awd

Mine engine is different. It takes camshaft sensor 9202134, not the one shown in picture

Post by **jblackburn** » 16 Mar 2014, 20:09

Drivers side, rear of engine.

pbizick · Post by **pbizick** » 16 Mar 2014, 20:21

My camshaft sensor is #9202134 not the one shown in picture.

Post by **jblackburn** » 16 Mar 2014, 20:24

Yep, but that's where it is. Probably behind a metal plate instead.

pbizick · Post by **pbizick** » 16 Mar 2014, 20:29

Is it difficult to replace the sensor, not the one in the picture

Post by **jblackburn** » 16 Mar 2014, 20:38

No. Couple T40 torx screws. Most people don't have these screwdrivers laying around, but you can find a set at Lowes or Home Depot.

pbizick · Post by **pbizick** » 16 Mar 2014, 21:26

This picure is a 1998 not a 1999

Post by **jblackburn** » 16 Mar 2014, 22:01

The cam position sensor hasn't moved. It's in the same place on a 1999 model.

The air intake hose may need to be moved out of the way (if it's a turbo), but it still should be on the exhaust cam on the drivers side of the engine, behind a metal cover.

Post by **jblackburn** » 16 Mar 2014, 22:05

: cam.JPG (78.77 KiB) Viewed 4860 times

pbizick · Post by **pbizick** » 16 Mar 2014, 22:27

Does the metal cover have to be removed to access the sensor