02 C70 Slow Fuel Fill Issue

RSM-GA · Post by **RSM-GA** » 30 Sep 2014, 08:43

I have an 02 C70 HPT Coupe that it recently just started giving me a problem when filling up. I can only put in about 50 cents before the nozzle shuts off. I have tried to "blow out" the vent tube without any success. Any help here would be appreciated as I drive 90 miles a day to and from work and slow filling like this is a problem!

Thanks
Rob

Post by **cn90** » 30 Sep 2014, 11:13

Pull the nozzle out just a tiny bit, it should help.

RSM-GA · Post by **RSM-GA** » 30 Sep 2014, 11:26

I have tried that and numerous other tricks wit the nozzle but it does not seem to make any difference!

Post by **jblackburn** » 30 Sep 2014, 11:58

You need to replace the rollover valve.

Post by **jimmy57** » 30 Sep 2014, 13:59

Before you replace anything check to see if spiders, dirt wasps, or something else has built a nest and obstructed to the vent. The vent is at the end of the black hard plastic line tied to filler pipe behind RR wheel housing inside quarter panel. Access from under car.

RSM-GA · Post by **RSM-GA** » 01 Oct 2014, 06:55

Do I just take of the round cylinder thing (looks like a small filter)?

RSM-GA · Post by **RSM-GA** » 01 Oct 2014, 09:23

Where is the rollover valve located?
Is that an involved process?

jblackburn wrote:You need to replace the rollover valve.