IPD sale Volvo Parts

2005 XC90 T6 - EVAP Purge Valve Location

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo XC90s. The XC90 proved to be very popular, and very good for Volvo's sales numbers, since its introduction in model year 2003 (North America).
Post Reply
Hyphy
Posts: 2
Joined: Sat Jul 25, 2015 3:33 pm
Year and Model: 2005 XC90 T6
Location: Cali, USA

2005 XC90 T6 - EVAP Purge Valve Location

Post by Hyphy » Sat Jul 25, 2015 3:42 pm

Got the purge valve to replace, but I'm having a hard time finding the location. I have looked by the fan shroud which seems to be the popular consensus, as well as by the fuel tank (but not the top). This is the part I am referring to.

https://www.ipdusa.com/products/10266/1 ... urge-valve

Have searched all over the internet, but nothing has been found specifically for my vehicle. It's big enough to where you can't miss it, but seems to be somewhere else I'm not looking.

Any help is appreciated in advance. Thank you. (Pictures would help immensely.)



arby1984
Posts: 3
Joined: Wed Feb 18, 2015 3:52 pm
Year and Model: 2006 XC90 2.5
Location: Missouri

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by arby1984 » Mon Jul 27, 2015 4:54 pm

It's number 1 on the drawing Image



Hyphy
Posts: 2
Joined: Sat Jul 25, 2015 3:33 pm
Year and Model: 2005 XC90 T6
Location: Cali, USA

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by Hyphy » Thu Jul 30, 2015 8:22 am

Is that coming off the intake manifold?



User avatar
FLXC90
Posts: 913
Joined: Mon Aug 18, 2014 4:31 pm
Year and Model: 04 XC90 T6
Location: Florida Panhandle
Has thanked: 2 times
Been thanked: 12 times
United States of America

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by FLXC90 » Fri Jul 31, 2015 9:24 pm

Looking under the hood, at the driver's side of the motor, look between the air cleaner and the fuse box. in the gap between these three items, you will see it buried with hose and electrical connections. Did the top pop off of yours like mine did? common mode of failure. Oh yeah, if it did, it won't look right, you'll see the disc of the body, and the top with electrical connector will be flopping around nearby!


Current Volvos:
1998 V70 T5, 112k sat 5 years, still in mechanical coma
2004 XC90 T6 AWD: 186k, 60 on transaxle
1998 POS70 N/A: DD/training aid, 236k but really about 240k, I think...ABS module

THolland
Posts: 2
Joined: Thu Jun 14, 2018 10:01 am
Year and Model: 2005 XC90
Location: West Boylston, MA
United States of America

Re: 2005 XC90 T6 - EVAP Purge Valve (& Pump) Location

Post by THolland » Thu Jun 14, 2018 2:00 pm

Hi,

Any chance that someone might point me to the same diagram to locate the purge pump? I am getting these two error codes and trying to chase down the origin but have to get access to connectors/wires on both the valve and pump. If anyone has any guidance on the likely origin on this problem please let me know as well

P2401 Volvo evaporative emission system leak detection pump control circuit low
P2401 -- ECM-433D -- Leakage diagnostic unit, pump -- Signal too low

P2419 Volvo evaporative emission system switching valve control circuit low
P2419 -- ECM-432D -- Leak diagnostic unit, valve -- Signal too low

Thanks,

- Tim



Post Reply

Who is online

Users browsing this forum: ggleavitt and 10 guests