IPD sale XeMODeX - Experts in Volvo Electronics

Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!

2005 XC90 T6 - EVAP Purge Valve Location

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo XC90s. The XC90 proved to be very popular, and very good for Volvo's sales numbers, since its introduction in model year 2003 (North America).
Post Reply
Hyphy
Posts: 2
Joined: Sat Jul 25, 2015 3:33 pm
Year and Model: 2005 XC90 T6
Location: Cali, USA

2005 XC90 T6 - EVAP Purge Valve Location

Post by Hyphy »

Got the purge valve to replace, but I'm having a hard time finding the location. I have looked by the fan shroud which seems to be the popular consensus, as well as by the fuel tank (but not the top). This is the part I am referring to.

https://www.ipdusa.com/products/10266/1 ... urge-valve

Have searched all over the internet, but nothing has been found specifically for my vehicle. It's big enough to where you can't miss it, but seems to be somewhere else I'm not looking.

Any help is appreciated in advance. Thank you. (Pictures would help immensely.)
arby1984
Posts: 3
Joined: Wed Feb 18, 2015 3:52 pm
Year and Model: 2006 XC90 2.5
Location: Missouri

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by arby1984 »

It's number 1 on the drawing Image
Hyphy
Posts: 2
Joined: Sat Jul 25, 2015 3:33 pm
Year and Model: 2005 XC90 T6
Location: Cali, USA

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by Hyphy »

Is that coming off the intake manifold?
User avatar
FLXC90
Posts: 1058
Joined: Mon Aug 18, 2014 4:31 pm
Year and Model: 98 V70 T5
Location: Florida Panhandle
Has thanked: 5 times
Been thanked: 32 times

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by FLXC90 »

Looking under the hood, at the driver's side of the motor, look between the air cleaner and the fuse box. in the gap between these three items, you will see it buried with hose and electrical connections. Did the top pop off of yours like mine did? common mode of failure. Oh yeah, if it did, it won't look right, you'll see the disc of the body, and the top with electrical connector will be flopping around nearby!
Current Volvos:
1998 V70 T5, 112k sat 5 years, still in mechanical coma (finally at the top of the pile )
2004 XC90 T6 AWD: 186k, 60 on transaxle ( traded in )
1998 POS70 N/A: DD/training aid, 236k but really about 240k, I think...ABS module( passed on to son who sold it)
THolland
Posts: 9
Joined: Thu Jun 14, 2018 10:01 am
Year and Model: 2005 XC90
Location: West Boylston, MA
Has thanked: 3 times

Re: 2005 XC90 T6 - EVAP Purge Valve (& Pump) Location

Post by THolland »

Hi,

Any chance that someone might point me to the same diagram to locate the purge pump? I am getting these two error codes and trying to chase down the origin but have to get access to connectors/wires on both the valve and pump. If anyone has any guidance on the likely origin on this problem please let me know as well

P2401 Volvo evaporative emission system leak detection pump control circuit low
P2401 -- ECM-433D -- Leakage diagnostic unit, pump -- Signal too low

P2419 Volvo evaporative emission system switching valve control circuit low
P2419 -- ECM-432D -- Leak diagnostic unit, valve -- Signal too low

Thanks,

- Tim
BoyKelly
Posts: 4
Joined: Wed Jun 19, 2019 8:46 pm
Year and Model: 2005 volvo xc90 t6 2
Location: Toronto

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by BoyKelly »

Hi there did you fine out What was wrong with P2401 Volvo evaporative emission system leak detection pump control circuit low
P2401 -- ECM-433D -- Leakage diagnostic unit, pump -- Signal too low

P2419 Volvo evaporative emission system switching valve control circuit low
P2419 -- ECM-432D -- Leak diagnostic unit, valve -- Signal too low. I am having the same problem 2005 volvo xc90 t6 2.9
BoyKelly
Posts: 4
Joined: Wed Jun 19, 2019 8:46 pm
Year and Model: 2005 volvo xc90 t6 2
Location: Toronto

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by BoyKelly »

Thanks
BoyKelly
Posts: 4
Joined: Wed Jun 19, 2019 8:46 pm
Year and Model: 2005 volvo xc90 t6 2
Location: Toronto

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by BoyKelly »

P2401 Volvo evaporative emission system leak detection pump control circuit low
P2401 -- ECM-433D -- Leakage diagnostic unit, pump -- Signal too low

P2419 Volvo evaporative emission system switching valve control circuit low
P2419 -- ECM-432D -- Leak diagnostic unit, valve -- Signal too low. Need some help how to fix this issue thanks
jimmy57
Posts: 6634
Joined: Fri Nov 12, 2010 9:25 am
Year and Model: 2004 V70R GT, et al
Location: Ponder Texas
Has thanked: 4 times
Been thanked: 265 times

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by jimmy57 »

The leakage detection pump is mounted to the rear axle subframe. One hose leading to it runs from up beside filler neck in Rt rear quarter panel and the other goes to the rectangular charcoal canister than is also mounted by the rear axle subframe. Those hose connections are larger hoses about the size of heater hose.
BoyKelly
Posts: 4
Joined: Wed Jun 19, 2019 8:46 pm
Year and Model: 2005 volvo xc90 t6 2
Location: Toronto

Re: 2005 XC90 T6 - EVAP Purge Valve Location

Post by BoyKelly »

Thanks so much Jimmy for your help I really appreciate it so much, so I should change the leakage detection pump. If I do it my self how long will it take me to do
Post Reply
  • Similar Topics
    Replies
    Views
    Last post