IPD sale Volvo Parts

C70 2000 2,4T tuning

How to go faster, stop quicker, and turn harder. Chips, exhaust, larger turbos, bigger/slotted/drilled rotors, high performance brake pads, manual boost controllers, performance shocks/struts/springs, airbox mods and more! Also discussion on HID and Xenon lights, aftermarket foglights and other exterior lighting.
jantt
Posts: 7
Joined: Sat Apr 21, 2018 11:36 am
Year and Model: C70 2000
Location: denmark
Been thanked: 2 times
Denmark

Re: C70 2000 2,4T tuning

Post by jantt » Tue Oct 18, 2016 9:34 am

Just had it on dyno and result : 257,5 Bhp and 366,8 Nm



User avatar
matthew1
Site Admin
Posts: 9244
Joined: Sat Sep 14, 2002 11:03 am
Year and Model: 850 T5, 1997
Location: Denver, Colorado, US
Has thanked: 190 times
Been thanked: 59 times
United States of America

Re: C70 2000 2,4T tuning

Post by matthew1 » Tue Oct 18, 2016 9:45 am

That's very respectable hp and torque.

366nm = 269lbs-ft


Help keep MVS on the web -> buy from sponsors.
Also -> Amazon link
.
Like the high quality content? Thank a moderator.
Help MVS and be an MVS Contributor.



1997 850 T5, MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace [gone]
2004 V70 R [gone]

jantt
Posts: 7
Joined: Sat Apr 21, 2018 11:36 am
Year and Model: C70 2000
Location: denmark
Been thanked: 2 times
Denmark

Re: C70 2000 2,4T tuning

Post by jantt » Tue Oct 18, 2016 10:11 am

Think it`s ok. BSR says 239 bhp with their software and with new race intercooler and new steelpipes then 257 must be ok.

Was thinking about bigger turbo and 3" downpipe, but was told to be aware if engine and gearbox can take it, so will stop here.
Was also told that bigger turbo just give more power in high end and I want it in low rpm`s.



jantt
Posts: 7
Joined: Sat Apr 21, 2018 11:36 am
Year and Model: C70 2000
Location: denmark
Been thanked: 2 times
Denmark

Re: C70 2000 2,4T tuning

Post by jantt » Sun Nov 06, 2016 1:45 am

I am thinking to mount a 3" downpipe to get the turbo to spools faster. Should give better speederrespons I have heard.

BSR only have it for HPT and with software.
Viva tells me that theirs fit both LPT and HPT and with no software.
From Volvo the cat and lambda is the same.

Can I take a 3" downpipe and mount without any problems ?



jantt
Posts: 7
Joined: Sat Apr 21, 2018 11:36 am
Year and Model: C70 2000
Location: denmark
Been thanked: 2 times
Denmark

Re: C70 2000 2,4T tuning

Post by jantt » Sun Nov 20, 2016 5:32 am

Have now mounted BSR 3" downpipe with race catalysator and software.
It worked ! Now there plenty of power in lower rpm.



jantt
Posts: 7
Joined: Sat Apr 21, 2018 11:36 am
Year and Model: C70 2000
Location: denmark
Been thanked: 2 times
Denmark

Re: C70 2000 2,4T tuning

Post by jantt » Sun Dec 18, 2016 9:12 am

Has now mounted TCV from Porsche. Gave a little more.



jantt
Posts: 7
Joined: Sat Apr 21, 2018 11:36 am
Year and Model: C70 2000
Location: denmark
Been thanked: 2 times
Denmark

Re: C70 2000 2,4T tuning

Post by jantt » Sat Apr 21, 2018 11:38 am

Got in dyno this week. Hadn`t done that ater I got the 3" downpipe. Result : 282,4 bhp and 390,6 Nm



User avatar
ndphotonl
Posts: 39
Joined: Sun May 27, 2018 7:09 am
Year and Model: S80 2.4T Wasa
Location: Netherlands
Has thanked: 6 times
Been thanked: 4 times
Contact:
Netherlands

Re: C70 2000 2,4T tuning

Post by ndphotonl » Thu Jun 14, 2018 9:20 am

Awesome figures! Do you have a dyno chart/print?


Volvo S80 2.4T Wasa Limited Edition
Portfolio / FlickR / YouTube channel / Image

jantt
Posts: 7
Joined: Sat Apr 21, 2018 11:36 am
Year and Model: C70 2000
Location: denmark
Been thanked: 2 times
Denmark

Re: C70 2000 2,4T tuning

Post by jantt » Thu Jun 14, 2018 9:58 am

It`s here.
It was a little hard to messure he said because I have a speederbox on, and the car was so eager to get up in speed
Attachments
C70 dyno 2.pdf
(241.58 KiB) Downloaded 23 times



jantt
Posts: 7
Joined: Sat Apr 21, 2018 11:36 am
Year and Model: C70 2000
Location: denmark
Been thanked: 2 times
Denmark

Re: C70 2000 2,4T tuning

Post by jantt » Mon Jun 25, 2018 9:48 am

and now with cutout valve







Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest