2004 XC90 2.9 PCV Service

xyourobob · Post by **xyourobob** » 19 Jan 2017, 18:31

I am getting ready to service the PCV system on my 2004 XC90 T6 2.9 however all the write ups I see are for the 2.5 engine. Is the procedure identical for the 2.9? If not can someone point me to the link that describes this procedure. Thanks!

Post by **ggleavitt** » 25 Jan 2017, 15:50

**Correction- was responding to T-belt, not PCV**. Lemme see if a PCV for a T6 procedure exists (doh).

Looks very much the same as the 2.5T from the front (plus or minus some hose routing for the overly expensive water cooled hose with the banjo bolts). From what I can tell my looking around, I would not hesitate to do this job based on having successfully completed it on a 5-cylinder. For sure I would take a ton of photos before and during disassembly.

Apologies for not taking time to read the initial post.