ETM mod issue

rap070765 · Post by **rap070765** » 10 Mar 2018, 21:18

So, this is what the shaft and 10 mm nut are supposed to look like.

: Shaft on throttle body removed from my 2000 s70 glt. No 10 mm nut. Copper coils.

And, this is what I am blessed with from the Swedish car gods.

Any ideas?

s10lowrider1994 · Post by **s10lowrider1994** » 10 Mar 2018, 22:14

Looks like you pulled the wrong side off.

rap070765 · Post by **rap070765** » 11 Mar 2018, 06:40

I did pull off the wrong end. Nice the way they're identical. Good response s10lowrider1994.

Post by **kahl** » 11 Mar 2018, 07:16

If your ETM is past the point of repair I have a rebuilt ETM that has the sacer mod that works perfect. Send me a PM.

Post by **kahl** » 11 Mar 2018, 07:38

Here are some pictures of my ETM tool connected to a ETM.