Login Register

Testing Turbo Boost Sensor for Ohmic values

Post Reply
brianbe
Posts: 22
Joined: 18 Apr 2018, 13:26
Year and Model: 2007 Volvo S60 2.5T
Location: Alburgh, VT.

Post by brianbe »

Hello, I have a 2007 Volvo S60 2.5T AWD sedan. I pulled codes P0238 & P0240, both related to the turbo boost sensor. Can I test the turbo boost sensor out of the car using an ohmmeter and if yes, what values should I expect to see from pin to pin?

User avatar
abscate
MVS Moderator
Posts: 36149
Joined: 17 Feb 2013, 17:54
Year and Model: 99: V70s S70s,05 V70
Location: Port Jefferson Long Island NY
Has thanked: 1610 times
Been thanked: 4068 times

Post by abscate »

I can’t find a part number for this sensor. My 1999 table is as follows

I seem to remember there were three pins on this , too , two are commons to the ECU bus and one is a resistance input.

I think I have a spare one and can try find tomorrow if it’s the same part number from late P80 s and P2s

3EEE10F6-82CF-43F1-A31B-45C43B4C601F.png
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread

brianbe
Posts: 22
Joined: 18 Apr 2018, 13:26
Year and Model: 2007 Volvo S60 2.5T
Location: Alburgh, VT.

Post by brianbe »

Thank you. I replaced the sensor and the problem is solved.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post