IPD sale Volvo Parts

Volvo S80 V8 2008 CV boot squeaking?

Help, Advice, Owners' Discussion and DIY Tutorials on the current (third) generation Volvo V70 wagon and XC70 crossover, and second generation S80.

This is a forum for owners or prospective owners of the third generation V70, second generation S80, and its siblings built on the EUCD platform.
Jackazz
Posts: 16
Joined: Mon Apr 24, 2017 7:10 am
Year and Model: 2008 S80 V8
Location: Tartu
Estonia

Volvo S80 V8 2008 CV boot squeaking?

Post by Jackazz » Wed Jun 13, 2018 11:50 am

I'va had this annoying squeaking noise for a while now (high pitch, rotational).
I recently got it checked and it turned out to be a front drivers side CV boot that is squeaking. The boot got taken off and axle rotated which made the noise disappear, so they replaced the boot but the noise is still persistent. Its not there when it's cold outside but is really noticable when its warm (like +17 Celsius) and when driving up to 60 km/h.

I tried lubricating the boot with silicone spray but it made no difference.
The noise is really driving me crazy.. Any ideas on what to do?



User avatar
SuperHerman
Posts: 731
Joined: Mon Dec 01, 2014 1:28 pm
Year and Model: 2004 & 2016 XC90
Location: Minnesota
Been thanked: 45 times
United States of America

Re: Volvo S80 V8 2008 CV boot squeaking?

Post by SuperHerman » Wed Jun 13, 2018 3:17 pm

I would look at the wheel bearing. I just went through a failing wheel bearing on my XC90. All of the testing by myself and then by two mechanics said the wheel bearing was fine. I changed everything, and I mean everything. Motor mounts, shocks, struts, transmission, CV axles, front differential, rear differential, 4 new tires, alignment and front drive shaft CV and repack of the rest. The noise was still there so I had them replace my wheel bearings and the noise is now gone.



ThommyKent
Posts: 180
Joined: Fri Nov 30, 2012 8:30 pm
Year and Model: 91 245 97 850 T5
Location: Bellevue WA USA
Been thanked: 1 time
Romania

Re: Volvo S80 V8 2008 CV boot squeaking?

Post by ThommyKent » Wed Jun 13, 2018 4:43 pm

The boot rotates with the axle, not sure it could squeak. My guess would be bearing.



Jackazz
Posts: 16
Joined: Mon Apr 24, 2017 7:10 am
Year and Model: 2008 S80 V8
Location: Tartu
Estonia

Re: Volvo S80 V8 2008 CV boot squeaking?

Post by Jackazz » Wed Jun 13, 2018 10:19 pm

Thanks fo the replies. But would a wheel bearing make a rubbery squeak? It only squeaks when driving forwards (or when the wheel is lifted up and rotated forwards by hand).



ThommyKent
Posts: 180
Joined: Fri Nov 30, 2012 8:30 pm
Year and Model: 91 245 97 850 T5
Location: Bellevue WA USA
Been thanked: 1 time
Romania

Re: Volvo S80 V8 2008 CV boot squeaking?

Post by ThommyKent » Fri Jun 15, 2018 2:41 am

Hard to define a rubbery squeak.



Jackazz
Posts: 16
Joined: Mon Apr 24, 2017 7:10 am
Year and Model: 2008 S80 V8
Location: Tartu
Estonia

Re: Volvo S80 V8 2008 CV boot squeaking?

Post by Jackazz » Fri Jun 15, 2018 2:44 am

True. I'm gonna get the wheel bearing replaced on monday. I discovered that the squeak changes pitch when turning wheel while driving (when i turn right, the pitch gets higher and louder, when i turn left, it get quieter). So i guess it really is the bearing.
New SKF bearing 110 € + 2 hours labour.



ThommyKent
Posts: 180
Joined: Fri Nov 30, 2012 8:30 pm
Year and Model: 91 245 97 850 T5
Location: Bellevue WA USA
Been thanked: 1 time
Romania

Re: Volvo S80 V8 2008 CV boot squeaking?

Post by ThommyKent » Fri Jun 15, 2018 4:56 pm

That definitely sounds like bearing.



User avatar
oragex
Posts: 3500
Joined: Fri May 24, 2013 6:20 am
Year and Model: S60 2003
Location: Canada
Has thanked: 61 times
Been thanked: 77 times
Contact:
Canada

Re: Volvo S80 V8 2008 CV boot squeaking?

Post by oragex » Fri Jun 15, 2018 5:05 pm

I have not yet seen a bearing squeak, but the dust plate behind the wheel hub can get bent and make noise while driving.

If going for the bearing, before removing the bearing bolts, with the axle and all brakes out, turn the bearing plate by hand to see if it's good or bad, it should be quite smooth if it's good, a little bit of roughness is acceptable.

I'm also thinking serpentine belt (some pulley being about to seize it's making the belt slip on it)


2003 2.4i S60 automatic 125k miles

ThommyKent
Posts: 180
Joined: Fri Nov 30, 2012 8:30 pm
Year and Model: 91 245 97 850 T5
Location: Bellevue WA USA
Been thanked: 1 time
Romania

Re: Volvo S80 V8 2008 CV boot squeaking?

Post by ThommyKent » Sat Jun 16, 2018 1:28 am

Any roughness is not acceptable, that`s a sure sign of needing replacement. A lighty loaded bearing will squeal when dry. The driveshaft bearing in my old 240 squealed so bad it would draw the attention of pedestrians.



Jackazz
Posts: 16
Joined: Mon Apr 24, 2017 7:10 am
Year and Model: 2008 S80 V8
Location: Tartu
Estonia

Re: Volvo S80 V8 2008 CV boot squeaking?

Post by Jackazz » Sat Jun 16, 2018 7:12 am

Definetly not the belt as my car is 1. LHD and 2. squeaking noise starts with the vehicle rolling + i also got all the pulleys and belt replaced couple of months ago.
I'd also like to point out that when i lifted up the front wheel and rotated it, there was some resistant alongside with that rubbery-squeaky-sound. Did the same on the opposite side and there was no resistanse nor any noise.



Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests