IPD sale Volvo Parts

2003 S40 no crank.

Help, Advice, Owners' Discussion and DIY Tutorials on S40 and V40. In this forum you'll find S40/V40-specific owners asking and answering questions on maintenance, ownership, repairs, tutorials and almost every do-it-yourself thing you can do to save money owning these Volvos.
1996 - 2004 S40
1996 - 2004 V40
Post Reply
User avatar
RickHaleParker
Posts: 2110
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 2 times
Been thanked: 223 times
United States of America

2003 S40 no crank.

Post by RickHaleParker » Sun Oct 21, 2018 6:17 pm

Before I go ripping in to this. Lets see if anybody has had this experience before.

Car was cranking and running fine. Pulled the Radio and CCM to change the lamps in the CCM. Reassembled and now the engine will not crank. The car does have some CCM DTCs but they where there before I started this.

Tried the IMM reset, Lock/Unlock five times. No DTCs in the IMM.

Anybody know of anything that may of gone wrong when I had it apart.
Platform: P80 1998 C70, B5234T3, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.

Platform: X40 (Nedcar) 2003 S40, B4204T3, AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
----------------------------------------------------------------
1997 S90, B6304S, AW30-42, Bosch Motronic 4.4 - Sold

User avatar
RickHaleParker
Posts: 2110
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 2 times
Been thanked: 223 times
United States of America

Re: 2003 S40 no crank.

Post by RickHaleParker » Sun Oct 21, 2018 11:01 pm

Could not leave it alone and ripped into it anyway. Traced it to the ignition switch.

I changed the relevant position between the electrical portion and the mechanical portion of the ignition switch, the car will crank and start.

I cannot think of anything that would limit the travel of the mechanical portion so I'm betting it is the electrical portion that is defective.

Later today I'll remove the cover from the electrical portion and see if I can correct it.
IMAG0269.jpg
Platform: P80 1998 C70, B5234T3, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.

Platform: X40 (Nedcar) 2003 S40, B4204T3, AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
----------------------------------------------------------------
1997 S90, B6304S, AW30-42, Bosch Motronic 4.4 - Sold

User avatar
RickHaleParker
Posts: 2110
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 2 times
Been thanked: 223 times
United States of America

Re: 2003 S40 no crank.

Post by RickHaleParker » Sat Oct 27, 2018 2:57 am

Nothing wrong with the electrical part.

Something in the lock cylinder is preventing the tumbler from moving to POS III. New lock cylinder >$150.00. Used from LKQ Pick-your-Part $14.00 but the closest one that has a 2000 - 2004 S40 is 180 miles away and I'm not sure you can get the key at that yard. The key needs to be in POS I to remove the tumbler.

Volvo part number 30887387 for cars with shiftlock mechanism and key-in warning.
Platform: P80 1998 C70, B5234T3, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.

Platform: X40 (Nedcar) 2003 S40, B4204T3, AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
----------------------------------------------------------------
1997 S90, B6304S, AW30-42, Bosch Motronic 4.4 - Sold

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests