CCM/Dampers - can we watch with VIDA?

[pdr1966sc]

I have just got my V70R on the road and have some DAMPER/CCM issues to resolve.
Using Vida, can we 'see' and operate the individual dampers and or monitor/watch what they are doing?
I HAVE resolved some preexisting - multiple communication issues, I ran CCM calibration on Vida, but I would not say that I got a definitive indication that it completed this, or what was happening during running the routine.
As it stands now, I can here the system moving a damper - maybe round and round slowly / quietly - not really sure which one it is and what it is doing or why.
The Thermistor sensor does not look like it is all linted up - and I have a 2nd CCM board but I am not going to change without a basis to do so (and yes, disconnect the battery when unplugging.....

PR

[z2003]

I don’t think that can “see” CCM action. The calibration take times. You have to wait it finish - Otherwise it may have some “strange actions”. I have one time meet. It blow cold air only - in winter.