IPD sale Volvo Parts
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

C30 transmission issues

Help, Advice, Owners' Discussion and DIY Tutorials devoted to the second generation C70, S40 and V50 Volvos -- awkwardly model year 2004 ½ onwards -- plus where to go for advice and discussion on Volvo's sporty C30 Coupe powered by Volvo's ubiquitous inline 5-cylinder power plant.
jmtreport
Posts: 1
Joined: Fri Jan 11, 2019 7:11 pm
Year and Model: 2008 c30
Location: VA
Has thanked: 0
Been thanked: 0
United States of America
jmtreport

C30 transmission issues

Post by jmtreport » Fri Jan 11, 2019 7:14 pm

Hi new here. I have a 2008 c30 automatic with 184000 miles on it. I am getting a hard shift between 2nd and 3rd gear. I am aware of the b4 servo update and awaiting its arrive. Anything else I should do? Further more. If I replace the transmission, I should only have to take it to volvo to do the programming correct?



User avatar
RickHaleParker
Posts: 2739
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 303 times
United States of America
RickHaleParker

Re: C30 transmission issues

Post by RickHaleParker » Sun Jan 13, 2019 9:50 pm

If you do replace the transmission, use the TCM (Transmission Control Module) that is in the car now. You should not need any reprogramming.


Platform: P80 1998 C70, B5234T3, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.

Platform: X40 (Nedcar) 2003 S40, B4204T3, AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.

Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
----------------------------------------------------------------
1997 S90, B6304S, AW30-42, Bosch Motronic 4.4 - Sold

Post Reply