IPD sale Volvo Parts

Transmission in line filters

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo XC90s. The XC90 proved to be very popular, and very good for Volvo's sales numbers, since its introduction in model year 2003 (North America).
Post Reply
PoppySheaf
Posts: 48
Joined: Mon Dec 17, 2018 7:14 pm
Year and Model: 2008 XC90
Location: Columbus, Ohio
Has thanked: 6 times
United States of America

Transmission in line filters

Post by PoppySheaf » Fri Jan 18, 2019 2:03 pm

2008 XC90

I'm swapping the tranny in a few weeks and have thought above installing one of these in-line magnet filters.
http://www.emergingent.com/subpage1Magnefine.htm

I read another post in here of someone who did. In these photos the connection to the filter are screw type clamps which are not made for any hose with significant pressure as the original lines appear to be high pressure type hoses when looking at the end connectors. I'm hesitant to use a screw clamp.
IMG_3198.jpg
I would think a "micromatic" like in this photo would be better suited, yet, on the other hand the filter barbs are plastic and could be crushed.
tn375_stepless-clamp051816154606.jpg
tn375_stepless-clamp051816154606.jpg (9.91 KiB) Viewed 101 times
Any thoughts from anyone on this.

User avatar
ggleavitt
Posts: 266
Joined: Sun Jun 04, 2006 11:33 pm
Year and Model: XC90 05-2.5T, 08-V8S
Location: Seattle
Been thanked: 38 times
United States of America

Re: Transmission in line filters

Post by ggleavitt » Fri Jan 18, 2019 3:21 pm

Could do like Dougy did- https://forums.swedespeed.com/showthrea ... rque/page2, with cooler or not.

edit 1/11/9- with cooler or not
2005 2.5T AWD-192k
2008 V8 AWD Sport-121k

Post Reply

Who is online

Users browsing this forum: Sannerdm, wanderdüne and 22 guests