IPD sale XeMODeX - Experts in Volvo Electronics

Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!

P80 850 rear bumper bracket bolts (982831, M10x130mm)

Help, Advice and DIY Tutorials on Volvo's extremely popular car line -- Volvo's 1990s "bread and butter" cars -- powered by the ubiquitous and durable Volvo inline 5-cylinder engine.

1992 - 1997 850, 850 R, 850 T5-R, 850 T5, 850 GLT
1997 - 2000 S70, S70 AWD
1997 - 2000 V70, V70 AWD
1997 - 2000 V70-XC
1997 - 2004 C70

User avatar
abscate
MVS Moderator
Posts: 22453
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 375 times
Been thanked: 1166 times

Re: P80 850 rear bumper bracket bolts (982831, M10x130mm)

Post by abscate »

The short ones attach the plate to the frame and were even worse than the long ones. I had to grind one off when I did this job.
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW
Link to Maintenance record thread
Link To Volvo Glossary
850forum
Posts: 133
Joined: Thu Jun 25, 2009 2:57 pm
Year and Model: 1995 850 turbo wagon
Location: USA
Been thanked: 6 times

Re: P80 850 rear bumper bracket bolts (982831, M10x130mm)

Post by 850forum »

This would be a simple job If all the bolts come out & I can get to the long bolt above the exhaust. And do it without jacking it up. But I think I'll just have to hand the parts to the mechanic, just tin case.
rguzz
Posts: 406
Joined: Wed Oct 07, 2015 8:41 am
Year and Model: 1996 850 turbo
Location: VA
Been thanked: 5 times

Re: P80 850 rear bumper bracket bolts (982831, M10x130mm)

Post by rguzz »

What was the outcome here? How did the job go in the end?
User avatar
abscate
MVS Moderator
Posts: 22453
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 375 times
Been thanked: 1166 times

Re: P80 850 rear bumper bracket bolts (982831, M10x130mm)

Post by abscate »

I just harvested two brackets and long bolts of the parts 1998. My job went fine replacing these, one bad bolt required grinding off, the bolt on the bracket, not the long bolt
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW
Link to Maintenance record thread
Link To Volvo Glossary
etzal
Posts: 16
Joined: Sat Aug 12, 2006 1:57 pm
Year and Model: 95 850 GLT
Location: Maryland
Been thanked: 1 time

Re: P80 850 rear bumper bracket bolts (982831, M10x130mm)

Post by etzal »

I am also planning to replace the bumper brackets for my 95 850 sedan and have begun sourcing parts.
After some research it seems there are differences between parts for the sedan and wagon.
It looks like the wagon uses the same bracket for both left and right sides but does the sedan?
Or does the brackets for sedan come in left and right versions.
Also does the sedan use the same bolt used in the wagon M10-130 or is it M10-150?
User avatar
volvolugnut
Posts: 1014
Joined: Sun Jan 19, 2014 9:51 am
Year and Model: 2001 V70
Location: Midsouth USA
Has thanked: 58 times
Been thanked: 127 times

Re: P80 850 rear bumper bracket bolts (982831, M10x130mm)

Post by volvolugnut »

Fastenal has the long bolts (If the thread pitch is correct at 1.5!) as SKU 39147 for M10 x 1.5 x 130 Grade is 8.8. You will need to confirm the thread pitch and compare price to McMaster Carr. This is a plain, uncoated finish. Others may be available with corrosion protection.

volvolugnut
2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple parts cars.
cn90
Posts: 6827
Joined: Wed Mar 31, 2010 9:54 am
Year and Model: 2004 V70 2.5T
Location: Omaha NE
Been thanked: 153 times

Re: P80 850 rear bumper bracket bolts (982831, M10x130mm)

Post by cn90 »

I have a whole bunch of nuts/bolts for FRONT bumper from a 1998 S70.
I wonder if they are similar.
I can send them to whoever wants them.
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
JimBee
Posts: 1769
Joined: Tue Dec 09, 2008 9:23 pm
Year and Model: 93 and 2 96 850's
Location: Minneapolis
Has thanked: 13 times
Been thanked: 28 times

Re: P80 850 rear bumper bracket bolts (982831, M10x130mm)

Post by JimBee »

Tascaparts.com had the OEM bolts in stock a couple of years ago when I bought mine. You could check with them. I found at the time it was best to call. Tel # is on their site. The clerk was very helpful.

I bought the brackets for both 96 850's and the right side only for the 93 (left side no longer available for the 93) and all the bolts. I've done one 96 wagon, took a sawzall to the end of the pipe to get at the left side long bolt. The short bolts came out pretty easily on both sides.

I actually had added the extension that was in the way a couple of years earlier b/c the stock pipe was too short and exhaust fumes were wafting into the cabin. I'm wondering if the exhaust system had been replaced with pipes spec'd for a sedan. My other 96 wagon had the same short pipe. Autozone sells a coupling to reinstall the section I trimmed off. The end piece and coupling can then be slipped back together with a little JB Weld.
JimBee
Posts: 1769
Joined: Tue Dec 09, 2008 9:23 pm
Year and Model: 93 and 2 96 850's
Location: Minneapolis
Has thanked: 13 times
Been thanked: 28 times

Re: P80 850 rear bumper bracket bolts (982831, M10x130mm)

Post by JimBee »

Interesting side topic on the rivets. That should probably be a separate post.
Has anybody tried these?
https://www.harborfreight.com/90-piece- ... 67611.html
Post Reply
  • Similar Topics
    Replies
    Views
    Last post