IPD sale Volvo Parts

Oil Leak on Turbo charger oil drain/vent pipe at block

Help, Advice, Owners' Discussion and DIY Tutorials on S40 and V40. In this forum you'll find S40/V40-specific owners asking and answering questions on maintenance, ownership, repairs, tutorials and almost every do-it-yourself thing you can do to save money owning these Volvos.
1996 - 2004 S40
1996 - 2004 V40
Post Reply
jumbicat
Posts: 26
Joined: Sun Sep 02, 2018 9:05 am
Year and Model: 2003 S40 2004 S60
Location: Lewisville, Tx
United States of America

Oil Leak on Turbo charger oil drain/vent pipe at block

Post by jumbicat » Sat Feb 16, 2019 1:25 pm

The oil vent pipe on bottom of turbo charger had a leak at engine so replaced seal. Thought I may have cut it putting it in because the leak continued. Verified seal was cut. Bought another seal and noticed oil spitting out once oil pressure came up. I pulled the oil cap off while testing the 3rd seal and noticed with cap off, oil sprayed out of block. Am I looking at a head gasket issue? New turbo charger fixed the smoke issue but now I'm chasing an oil pressure issue.

User avatar
RickHaleParker
Posts: 2107
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 2 times
Been thanked: 223 times
United States of America

Re: Oil Leak on Turbo charger oil drain/vent pipe at block

Post by RickHaleParker » Sat Feb 16, 2019 1:43 pm

Do you mean your getting pressure out of the oil fill cap, like below?
This is the test for a clogged PCV system (Positive Crankcase Ventilation) which is known to blow oil past seals.

Platform: P80 1998 C70, B5234T3, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.

Platform: X40 (Nedcar) 2003 S40, B4204T3, AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
----------------------------------------------------------------
1997 S90, B6304S, AW30-42, Bosch Motronic 4.4 - Sold

jumbicat
Posts: 26
Joined: Sun Sep 02, 2018 9:05 am
Year and Model: 2003 S40 2004 S60
Location: Lewisville, Tx
United States of America

Re: Oil Leak on Turbo charger oil drain/vent pipe at block

Post by jumbicat » Sat Feb 16, 2019 2:40 pm

No, I did this test before replacing turbo charger and the glove would inflate/deflate at a very fast rate. No positive pressure like the video. Odd that taking the oil cap off would cause oil to stream out the oil vent pipe seal at engine block. Put the cap on and it's a slow leak.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests