IPD sale Volvo Parts
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

Help identifying a part.

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

brettbo
Posts: 13
Joined: Mon Mar 04, 2013 9:31 pm
Year and Model: 1999 S70
Location: Colorado
Has thanked: 0
Been thanked: 0
brettbo

Help identifying a part.

Post by brettbo » Sun Mar 24, 2019 4:38 pm

Doing the PCV breather replacement on my 2006 S60R. I took the small hose off of the top of the intake and it broke so I was going to buy some tubing and replace the hose. There is a sensor that has another tube coming out of the other end. It looked in bad shape as well so I was going to replace that as well. In trying to remove the clamp from the hose the connector of the sensor broke inside of the hose. There is a part number but nothing comes up as it is hard to determine the first letter/number of the part. Here is a picture of the part and hoses in question. Any help is appreciated, thank you!
Attachments
20190324_162943.jpg



User avatar
abscate
MVS Moderator
Posts: 17324
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 185 times
Been thanked: 560 times
Trinidad & Tobago
abscate

Re: Help identifying a part.

Post by abscate » Sun Mar 24, 2019 5:09 pm

It's a check valve and no longer available new on P80s, I'll check 😀 For P2s.

Yu can use a generic one or get a junkyard part.

The arrow should point from the low pressure part to the vacuum source, that's important


1 SWMBO for 30 years
2 Volvos
3 VWs
4 Careers
5 cats/dogs/gears
6 Perfect Ladies in waiting
7 Drivers
8 Boats- with a big pointy metal thing on top

1999 V70 T5M 56 2005 V70 NA M56 VWs BMW

brettbo
Posts: 13
Joined: Mon Mar 04, 2013 9:31 pm
Year and Model: 1999 S70
Location: Colorado
Has thanked: 0
Been thanked: 0
brettbo

Re: Help identifying a part.

Post by brettbo » Tue Mar 26, 2019 2:59 pm

Can I just use a 3/8" fuel hose for the line attaching to the intake? I picked up a few of those valves at the junkyard. Thank you.



User avatar
abscate
MVS Moderator
Posts: 17324
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 185 times
Been thanked: 560 times
Trinidad & Tobago
abscate

Re: Help identifying a part.

Post by abscate » Tue Mar 26, 2019 6:12 pm

Try to match the thickness of the wall to support vacuum , but fuel hose should be fine.


1 SWMBO for 30 years
2 Volvos
3 VWs
4 Careers
5 cats/dogs/gears
6 Perfect Ladies in waiting
7 Drivers
8 Boats- with a big pointy metal thing on top

1999 V70 T5M 56 2005 V70 NA M56 VWs BMW

brettbo
Posts: 13
Joined: Mon Mar 04, 2013 9:31 pm
Year and Model: 1999 S70
Location: Colorado
Has thanked: 0
Been thanked: 0
brettbo

Re: Help identifying a part.

Post by brettbo » Tue Mar 26, 2019 6:28 pm

Thank you. Looks like the other hose from the vacuum to the valve will have to be reused even though not in the best shape (just some dry caking on the outside). I could not find a hose anywhere to match the diameter, I think it is 11 or 12 mm. 3/8 was too small and 1/2 was too big.



User avatar
abscate
MVS Moderator
Posts: 17324
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 185 times
Been thanked: 560 times
Trinidad & Tobago
abscate

Re: Help identifying a part.

Post by abscate » Tue Mar 26, 2019 7:09 pm

Use that 3/8 and just open it with a tapered hard anvil until it will slip over the check valve.

Old hose will give you problems later


1 SWMBO for 30 years
2 Volvos
3 VWs
4 Careers
5 cats/dogs/gears
6 Perfect Ladies in waiting
7 Drivers
8 Boats- with a big pointy metal thing on top

1999 V70 T5M 56 2005 V70 NA M56 VWs BMW

brettbo
Posts: 13
Joined: Mon Mar 04, 2013 9:31 pm
Year and Model: 1999 S70
Location: Colorado
Has thanked: 0
Been thanked: 0
brettbo

Re: Help identifying a part.

Post by brettbo » Tue Mar 26, 2019 9:14 pm

Will it affect performance at all? I presume the original hoses are at the specific width and length because it was engined as such.



User avatar
abscate
MVS Moderator
Posts: 17324
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 185 times
Been thanked: 560 times
Trinidad & Tobago
abscate

Re: Help identifying a part.

Post by abscate » Wed Mar 27, 2019 8:11 am

Length unimportant. Try to reproduce the length so you don't have excess hose lying around and chafing holes.

Width also unimportant as long as they don't collapse under vacuum and stop 'sucking'


1 SWMBO for 30 years
2 Volvos
3 VWs
4 Careers
5 cats/dogs/gears
6 Perfect Ladies in waiting
7 Drivers
8 Boats- with a big pointy metal thing on top

1999 V70 T5M 56 2005 V70 NA M56 VWs BMW

Post Reply