IPD sale Volvo Parts
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

P2111 After O2 Sensor Replacement

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

User avatar
abscate
MVS Moderator
Posts: 17324
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 185 times
Been thanked: 560 times
Trinidad & Tobago
abscate

Re: P2111 After O2 Sensor Replacement

Post by abscate » Mon Apr 15, 2019 1:46 am

No apology needed Chris, perfectly reasonable question.

The depth of knowledge here is incredible - there are about five guys here who I’m convinced could assemble a Volvo from parts on boxes in the dark, on a ship in rough seas.


1 SWMBO for 30 years
2 Volvos
3 VWs
4 Careers
5 cats/dogs/gears
6 Perfect Ladies in waiting
7 Drivers
8 Boats- with a big pointy metal thing on top

1999 V70 T5M 56 2005 V70 NA M56 VWs BMW

ChrisRicc
Posts: 16
Joined: Sat Mar 30, 2019 3:00 pm
Year and Model: 2004 V70R
Location: Boulder, CO
Has thanked: 3 times
Been thanked: 1 time
United States of America
ChrisRicc

Re: P2111 After O2 Sensor Replacement

Post by ChrisRicc » Mon Apr 15, 2019 6:39 pm

Thanks, Abscate.

Nice crew to have around. I know I appreciate the help.
These users thanked the author ChrisRicc for the post:
abscate



ChrisRicc
Posts: 16
Joined: Sat Mar 30, 2019 3:00 pm
Year and Model: 2004 V70R
Location: Boulder, CO
Has thanked: 3 times
Been thanked: 1 time
United States of America
ChrisRicc

Re: P2111 After O2 Sensor Replacement

Post by ChrisRicc » Fri Apr 19, 2019 3:40 pm

The next leg of the journey...
InkedHarness Connector_LI.jpg
InkedHarness Connector_LI.jpg (721.84 KiB) Viewed 97 times
I've managed to remove ECM and TCM and the harness connector to the ECM receiver. I identified the wires coming from the throttle body harness and have taped each for future ease of location. However, with my trusty set of pin extractors I cannot for the life of me pull each wire from the connector shown in the image above. The image highlights two of the larger sockets verified with my multi-meter.

Does anyone know a trick that I'm missing extracting these wires? Clearly, my complete lack of auto electronics experience is hindering me more than a little.

Again, I appreciate the help. I'd be dead in the water without this site.



User avatar
RickHaleParker
Posts: 2741
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 303 times
United States of America
RickHaleParker

Re: P2111 After O2 Sensor Replacement

Post by RickHaleParker » Fri Apr 19, 2019 6:03 pm

The tool compresses the locking tabs that keep the pin in the housing.
Look up into the housing for the locking tabs so you will know what your after.

1. Find the right extractor.
2. Push on the wire from the back side.
3. Insert extractor into the front side.
4. Pull pin out back side.
5. Remove extractor.



Platform: P80 1998 C70, B5234T3, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.

Platform: X40 (Nedcar) 2003 S40, B4204T3, AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.

Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
----------------------------------------------------------------
1997 S90, B6304S, AW30-42, Bosch Motronic 4.4 - Sold

ChrisRicc
Posts: 16
Joined: Sat Mar 30, 2019 3:00 pm
Year and Model: 2004 V70R
Location: Boulder, CO
Has thanked: 3 times
Been thanked: 1 time
United States of America
ChrisRicc

Re: P2111 After O2 Sensor Replacement

Post by ChrisRicc » Fri Apr 19, 2019 6:48 pm

RHP - thanks for the directions. That will help. Any idea which extractor works on the pins I've highlighted? I've tried the dual pointy pin extractor tip of varying sizes and the single rectangular tip. The cylindrical ones don't seem right.



XC70Rider
Posts: 332
Joined: Thu Oct 18, 2018 7:09 pm
Year and Model: 2007 XC70
Location: MA
Has thanked: 19 times
Been thanked: 12 times
United States of America
XC70Rider

Re: P2111 After O2 Sensor Replacement

Post by XC70Rider » Sat Apr 20, 2019 6:24 am

ChrisRicc wrote:
Fri Apr 19, 2019 6:48 pm
RHP - thanks for the directions. That will help. Any idea which extractor works on the pins I've highlighted? I've tried the dual pointy pin extractor tip of varying sizes and the single rectangular tip. The cylindrical ones don't seem right.
To remove those you need use a pin extractor with side to side pins. Not a tube shaped pin extractor.



Post Reply