IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

Angle gear repair

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

Posts: 1
Joined: Sun Apr 07, 2019 5:12 pm
Year and Model: 2001 XC70
Location: NORCAL
Has thanked: 0
Been thanked: 0
United States of America

Angle gear repair

Post by bowman143 » Sun Apr 07, 2019 5:15 pm

Hey guys, sorry if this is in the topics already but i searched and searched. I am resealing the angle gear in my 2001 xc70 and am using a new adjusting nut/crown wheel. Every procedure i can find says to mark the old one so you put it back at the same place. Is there a specified torque? Is there endplay to measure? HALP!

Posts: 92
Joined: Sun Apr 01, 2018 6:32 pm
Year and Model: 2006 xc70
Location: California
Has thanked: 35 times
Been thanked: 3 times
United States of America

Re: Angle gear repair

Post by Rvolvos » Sun Apr 07, 2019 9:10 pm

This might be a good link. I used it to replace the axle seals of the angle gear on my xc70.
http://volvospeed.com/vs_forum/topic/87 ... ent-xc-70/
2006 XC70 2.5T 190k
2006 V70 2.5T 152k
2011 C30 T5 AW55-50SN 99k
2011 C30 T5 M66 66k

Post Reply
  • Similar Topics
    Last post