IPD sale Volvo Parts
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

Door Lock Cylinder Not Responding Topic is solved

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

chris11211
Posts: 25
Joined: Tue Feb 26, 2019 4:44 pm
Year and Model: 2006 s60
Location: NY
Has thanked: 6 times
Been thanked: 3 times
United States of America
chris11211

Door Lock Cylinder Not Responding

Post by chris11211 » Wed May 01, 2019 10:10 pm

I have a problem with my S60 06 when I put in my keys to the driver door, it does not respond to me turning left or right on the cylinder. And there are other annoyances such as when I push down on the door lock stick, it would go back up and then down again in random intervals for 2-3 seconds until it decides on whether to remain unlocked or not.

So, I am wondering if this is a simple DIY project that I can tackle, or should I take it to a mechanic? And what parts should I be looking for here; a door actuator?
These users thanked the author chris11211 for the post:
Rdmin



volvodork
Posts: 9
Joined: Wed Aug 14, 2013 6:39 pm
Year and Model: 2001 X/C 70
Location: Charlotte
Has thanked: 0
Been thanked: 3 times
United States of America
volvodork

Re: Door Lock Cylinder Not Responding

Post by volvodork » Thu May 02, 2019 12:04 pm

My 2001 X/C70 was doing the same thing. Opened up the door panel and found the rod connecting the cylinder to the module was disconnected. You can find the clips in a parts store to retain the rod and pay attention to where the threaded rod is installed in the lower clips as you can reinstall it at the wrong depth and it may not actuate the module if too short (I marked the threads with a marker before disconnecting it.) Should make sense when you see it.



chris11211
Posts: 25
Joined: Tue Feb 26, 2019 4:44 pm
Year and Model: 2006 s60
Location: NY
Has thanked: 6 times
Been thanked: 3 times
United States of America
chris11211

Re: Door Lock Cylinder Not Responding

Post by chris11211 » Thu May 02, 2019 4:07 pm

Thanks, but what do I buy? Part name/number



EngineeringBloke
Posts: 217
Joined: Sat Sep 08, 2012 7:31 pm
Year and Model: 2006 2.5T S60
Location: Boston
Has thanked: 28 times
Been thanked: 19 times
United States of America
EngineeringBloke

Re: Door Lock Cylinder Not Responding

Post by EngineeringBloke » Thu May 02, 2019 7:47 pm

Take a look at the inside of the door. You may find the lock connector out of place, or part of the plastic that holds the end may have broken and I think Oragex fixed his by drilling a hole into the plastic box and using a zip tie to hold the connector in place.

Lower window.
Remove triangular black plastic"sail panel" at front edge of window. Pulls towards you, away from window.
Remove 6 inch long cover in inside door handle. Try not to scratch it. Can use a knife under the bottom edge to lift it away.
Undo the two Torx screws holding the door handle.
Remove the plastic trim 'buttons' around the door panel by pushing in the center pin by about 1/6" - should click.
Lift off the door panel being aware that there are wires for the tweeter to two plugs for the controls, in addition to the lock connector.

This video shows it in about 4 minutes during a door speaker upgrade.


The door handle/lock connection is shown at 3:47



volvodork
Posts: 9
Joined: Wed Aug 14, 2013 6:39 pm
Year and Model: 2001 X/C 70
Location: Charlotte
Has thanked: 0
Been thanked: 3 times
United States of America
volvodork

Re: Door Lock Cylinder Not Responding

Post by volvodork » Fri May 03, 2019 10:11 am

Most auto parts stores will know what you are looking for if you tell them. There are different types and the originals are just “grommet” style but the ones that have both the grommet for the cylinder end and a “wrap-around” arm that clips to the rod itself could probably work as well.



jjss70
Posts: 20
Joined: Sat Feb 16, 2019 1:13 am
Year and Model: 99 s70 Turbo AWD
Location: Gresham, OR.
Has thanked: 7 times
Been thanked: 0
United States of America
jjss70

Re: Door Lock Cylinder Not Responding

Post by jjss70 » Fri May 03, 2019 4:47 pm

Hi, I am a newbie and need some advice. I've got a 99 S70 I just swapped an engine into that is kicking out some DTC's. So far I have a P1113, which I believe is the O2 sensor, I also Have all the coilpacks starting at P0351 and ending at P0356 for a total of 6 altogether. I have gone thru a lot of the posts on the site & haven't come up w/ a vacuum hose diagram that I can make sense of. Thanks for all your help, John.



EngineeringBloke
Posts: 217
Joined: Sat Sep 08, 2012 7:31 pm
Year and Model: 2006 2.5T S60
Location: Boston
Has thanked: 28 times
Been thanked: 19 times
United States of America
EngineeringBloke

Re: Door Lock Cylinder Not Responding

Post by EngineeringBloke » Fri May 03, 2019 7:53 pm

Hi John,
Please start a new thread on your DTCs as your question is unrelated to the door lock issue and will not get the views you need.



chris11211
Posts: 25
Joined: Tue Feb 26, 2019 4:44 pm
Year and Model: 2006 s60
Location: NY
Has thanked: 6 times
Been thanked: 3 times
United States of America
chris11211

Re: Door Lock Cylinder Not Responding

Post by chris11211 » Thu May 23, 2019 11:10 pm

@volvodork

Ok I'm still having trouble trying to find the part that I need to replace. None of the discount auto stores have it, and I don't know what model number I'm looking for. Any help?



volvodork
Posts: 9
Joined: Wed Aug 14, 2013 6:39 pm
Year and Model: 2001 X/C 70
Location: Charlotte
Has thanked: 0
Been thanked: 3 times
United States of America
volvodork

Re: Door Lock Cylinder Not Responding

Post by volvodork » Tue May 28, 2019 7:05 am

Found a Dorman #75450 part number at Advance it’s an assorted pack but should have one that would work in it.
Search for “door lock rod clips” on other sites.



chris11211
Posts: 25
Joined: Tue Feb 26, 2019 4:44 pm
Year and Model: 2006 s60
Location: NY
Has thanked: 6 times
Been thanked: 3 times
United States of America
chris11211

Re: Door Lock Cylinder Not Responding

Post by chris11211 » Tue May 28, 2019 11:31 pm

Alright, looks like I've found what was causing all of my locking havoc and it's anything but connected to the cylinder.
https://photos.app.goo.gl/EHdutRhJ9KYnKUPo6

So, I don't know how i should tackle this. Should I go to the stealership and see if they can give me a little plastic piece? Is there a code for that? I don't even know how it can even get out of that bend.

Also found a video on changing the lock. In case someone else wants to know whats going on.




Post Reply