IPD sale Volvo Parts
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

ATF line I.D. for Magnefine filter?

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

Mr. Detail
Posts: 285
Joined: Wed May 03, 2006 11:21 am
Year and Model: 2002 V70 N/A
Location: Newtown Square, Pennsylvania
Has thanked: 0
Been thanked: 1 time
United States of America
Mr. Detail

ATF line I.D. for Magnefine filter?

Post by Mr. Detail » Wed Jun 05, 2019 7:23 am

Since I am not even sure of where the ATF line actually is, can anyone tell me what the I.D. is on my 2002 V70 so I can purchase the correct size filter?
Here is the e-mail response from the "Magnefine" company: "It will either have a 3/8" or 1/2" I.D. You will be able to tell if it is the 1/2" as the OD of the line is extremely large. Most of the Volvo's in that era are the 3/8" but there were some that were the 1/2" so I don't want to guess."



XC70Rider
Posts: 380
Joined: Thu Oct 18, 2018 7:09 pm
Year and Model: 2007 XC70
Location: MA
Has thanked: 20 times
Been thanked: 15 times
United States of America
XC70Rider

Re: ATF line I.D. for Magnefine filter?

Post by XC70Rider » Wed Jun 05, 2019 8:17 am

In late April I defined the size of the Magnefine filter. I found it in a few seconds using the SEARCH function
XC70Rider wrote:
Sun Apr 21, 2019 7:18 am

The Magnefine 3/8" Magnetic Inline Transmission Filter does have an internal bypass valve. Measuring the ATF temp with VIDA the temp didn't change after I installed this filter last December. I wouldn't of installed the filter if it didn't have the bypass valve.
Watch these video in this post I made for you in your 'Crush Washer' thread. It defines how to install the filter, drain the ATF, shows the location of the ATF drain plug and answers many more questions
Last edited by XC70Rider on Wed Jun 05, 2019 12:59 pm, edited 1 time in total.



Archer
Posts: 66
Joined: Wed Feb 24, 2016 4:23 am
Year and Model: 1998 V70 T5/S70 T5M
Location: Florida
Has thanked: 0
Been thanked: 3 times
United States of America
Archer

Re: ATF line I.D. for Magnefine filter?

Post by Archer » Wed Jun 05, 2019 8:26 am

I have a 2002 V70 T5, installed a Magnefine filter, it was 3/8".



Mr. Detail
Posts: 285
Joined: Wed May 03, 2006 11:21 am
Year and Model: 2002 V70 N/A
Location: Newtown Square, Pennsylvania
Has thanked: 0
Been thanked: 1 time
United States of America
Mr. Detail

Re: ATF line I.D. for Magnefine filter?

Post by Mr. Detail » Wed Jun 05, 2019 9:26 am

Thanks much gentlemen!



Post Reply