IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

Flexplate compatibility between models

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

Praja
Posts: 4
Joined: Fri Jul 26, 2019 11:47 am
Year and Model: 2002 XC
Location: Northland
Has thanked: 0
Been thanked: 0
New Zealand
Praja

Flexplate compatibility between models

Post by Praja » Fri Jul 26, 2019 11:56 am

I have a 2002 XC V70, my query is which models would the flexplate be interchangeable with?



highmiles
Posts: 45
Joined: Tue Dec 11, 2018 11:09 am
Year and Model: 2003 S60
Location: NC
Has thanked: 4 times
Been thanked: 1 time
United States of America
highmiles

Re: Flexplate compatibility between models

Post by highmiles » Fri Jul 26, 2019 2:52 pm

I suggest doing a part # look up from a site like Lisle Volvo where you can enter your specific VIN then cross referencing that part # to other models.
Another strategy would be to determine the engine designation type https://en.wikipedia.org/wiki/Volvo_V70
and then figure out what other models used that motor.
It is very likely that the flex plate was used across a wide variety of cars.



User avatar
- Pete -
Posts: 195
Joined: Fri Dec 06, 2013 10:13 pm
Year and Model: 01, 04, 04, 04, 06 V
Location: Minnesota/Wisconsin
Has thanked: 21 times
Been thanked: 32 times
United States of America
- Pete -

Re: Flexplate compatibility between models

Post by - Pete - » Fri Jul 26, 2019 9:00 pm

Are you having some nasty sounds when the starter gear hits the ring gear?

If so, this might be of interest viewtopic.php?f=9&t=87132

I recently replaced a flywheel on one of our P2 AWD Volvos. It had one of the infamous "bad flywheels" that seems to have been installed in an extremely small representation of these cars.

The car was our 04 2.5T V70 AWD & I replaced it with a flywheel out of an 06 2.5T XC90, so yeah, there's a lot of models that you can swap flywheels from/to.

I got my replacement for $40 at Strandberg Auto in Centuria WI. Give them a call, tell them what you have & what you want to replace & they will tell you what you need.

https://www.strandbergauto.com/
715-646-2388


2001 V70XC 142k
2004 V70 AWD 134k
2004 V70R M66 142k
2004 XC70 278k
2006 XC70 155k

Post Reply