IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

12v electric socket ignition power cut, ignition wire

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

CIK7
Posts: 73
Joined: Mon Jan 14, 2019 8:15 am
Year and Model: 01 V70 Base
Location: Oklahoma
Has thanked: 11 times
Been thanked: 0
United States of America
CIK7

12v electric socket ignition power cut, ignition wire

Post by CIK7 » Wed Aug 21, 2019 12:20 pm

I have been trying to wrap my head around this one. I cant figure out where the 12v socket wiring goes after going from socket to fuse. Ive tried tracing it but to no avail. How would i cut all power (past the fuse) to the 12v? But i want an alternative to doing that. So with that in mind, does anybody know if one of the purple wires in slot #13 (20A fuse) is ignition for the 12v? There are 4 purples close together but only 3 are side by side. Fuse #13 has 1 medium and 1 small squished together, then a medium right next to it. I wonder if the small one is the ignition? Please refer to the picture of fusebox for this. What is the yellow wire for on the rear 12v? I thought it was ignition but i cut it and the socket still only works on ignition power. Please refer to picture of wire harness for this.
Basically i want all 12v sockets to stay on even after ignition power off.
You do not have the required permissions to view the files attached to this post.