IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

MC Brake Pressure Connector Removal? 2007 S60

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

VeroS60
Posts: 6
Joined: Fri Aug 23, 2019 1:13 pm
Year and Model: 2007 S60
Location: TX
Has thanked: 2 times
Been thanked: 0
United States of America
VeroS60

MC Brake Pressure Connector Removal? 2007 S60

Post by VeroS60 » Wed Aug 28, 2019 11:42 am

I’m replacing the brake booster and master cylinder on my 2007 S60 (has DSTC). Does anyone understand how to remove the connectors on the brake pressure servos on the bottom of the master cylinder? I Need to disconnect these so I can remove the pressure servos from the MC (which requires a 27mm socket). Thanks!!



jimmy57
Posts: 6336
Joined: Fri Nov 12, 2010 9:25 am
Year and Model: 2004 V70R GT, et al
Location: Ponder Texas
Has thanked: 2 times
Been thanked: 163 times
jimmy57

Re: MC Brake Pressure Connectors ??

Post by jimmy57 » Wed Aug 28, 2019 8:52 pm

Here are photos from my F450. It uses the same sensor and connector. I don't have a Volvo here today with DSTC with the sensors. One photo shows my thumb depressing the tab that releases it and another shows the tab on the more narrow end. It is barely rectangular.
You do not have the required permissions to view the files attached to this post.
These users thanked the author jimmy57 for the post:
VeroS60



VeroS60
Posts: 6
Joined: Fri Aug 23, 2019 1:13 pm
Year and Model: 2007 S60
Location: TX
Has thanked: 2 times
Been thanked: 0
United States of America
VeroS60

Re: MC Brake Pressure Connector Removal? 2007 S60

Post by VeroS60 » Fri Aug 30, 2019 1:20 pm

Got it, thanks. I was actually able to see the tab once I removed the MC from the booster.



Post Reply