IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

Crank Position Sensor pin outs

Help, Advice, Owners' Discussion and DIY Tutorials on all Volvo's "mid era" rear wheel drive Volvos.

1975 - 1993 240
1983 - 1992 740
1982 - 1991 760
1986 - 1991 780
1990 - 1998 940
1990 - 1998 960
1997 - 1998 V90/S90

Joegrent
Posts: 3
Joined: Tue Nov 12, 2019 7:04 pm
Year and Model: 95 940
Location: Here
Has thanked: 0
Been thanked: 1 time
Canada
Joegrent

Crank Position Sensor pin outs

Post by Joegrent » Wed Nov 13, 2019 11:26 am

Ordered a sensor (still shipping) and want to check the pin out for it. Have the wiring diagramming and it shows:
  1. Red
  2. Blue
  3. Black
coming from the computer. Since I don't have the part in my hand, not sure if the pins are labelled. Also assuming it is 5V coming from the ECU too to pin 1?? Just not sure and cannot measure the harness pins.

Thanks for the help.

PS I bought the sensor for $4 including shipping. New.



Joegrent
Posts: 3
Joined: Tue Nov 12, 2019 7:04 pm
Year and Model: 95 940
Location: Here
Has thanked: 0
Been thanked: 1 time
Canada
Joegrent

Re: Crank Position Sensor pin outs

Post by Joegrent » Sat Nov 16, 2019 8:59 am

Pins are labelled but still need ti know the voltages coming from the ECU and if it is a pull down sensor design.



Post Reply
  • Similar Topics
    Replies
    Views
    Last post