IPD sale XeMODeX - Experts in Volvo Electronics

Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!

C30 P0133 code

Help, Advice, Owners' Discussion and DIY Tutorials devoted to the second generation C70, S40 and V50 Volvos -- awkwardly model year 2004 ½ onwards -- plus where to go for advice and discussion on Volvo's sporty C30 Coupe powered by Volvo's ubiquitous inline 5-cylinder power plant.
Post Reply
Posts: 1
Joined: Sat Nov 16, 2019 9:03 am
Year and Model: 2011 c30
Location: crown point

C30 P0133 code

Post by dn10r »

I have 2011 C30 heavily modded with k16 turbo and keep getting a P0133 code, Bank 1 Sensor 1 slow to respond code. I have replaced the upstream wide bad and downstream o2 sensors. Still getting code. Any idea's?? I did replace the mass air flow sensor because the wire broke with just a stock one. Looks like the wire is bent just a bit, but cars runs great. Could the MAF sensor be it? Do I need and upgraded one since the car is modded?
User avatar
Posts: 4709
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 604 times

Re: C30 P0133 code

Post by RickHaleParker »

Check for opens and shorts in the O2 wiring harnesses.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD.
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
Post Reply
  • Similar Topics
    Last post