Volvo Forums

mackoauto · Post by mackoauto » Wed Nov 20, 2019 6:15 am

Hello All. I am looking for any online resource available to assist in the removal and replacement of the Cat. Converter on a '10 xc 60 3.0T.

Post by jimmy57 » Wed Nov 20, 2019 8:27 am

Disconnect exhaust pipe at 6 bolt double pipe flange, remove the right axle, remove rear driveshaft from angle gear, and then remove the angle gear. With the angle gear out of the way the support bracket bolts and the cat to turbo bolts are accessible.

mackoauto · Post by mackoauto » Tue Dec 03, 2019 5:27 pm

Thanks for the help. Sorry it took so long to respond, I was having a health issue.

jenkinskg · Post by jenkinskg » Tue Jan 07, 2020 8:58 am

My car is a 2011 xc60, no shafts needed to replace cat, do not buy a cat from autozone, mine failed in 1 year.
Got full refund, and the CAT did not fit very well, muffler shop needed to cut and weld to make it fit.
My car has 1 ex manifold, and cat pipe splits to 2 pipes.
I bought a really nice cat on Amazon. https://www.amazon.com/gp/product/B07VN ... UTF8&psc=1
No codes at all since install

Volvo Forums

2010 XC 60 Catalytic Converter R And R

2010 XC 60 Catalytic Converter R And R

Re: 2010 XC 60 CATALYTIC CONVERTER R AND R

Re: 2010 XC 60 CATALYTIC CONVERTER R AND R

Re: 2010 XC 60 CATALYTIC CONVERTER R AND R