IPD sale XeMODeX - Experts in Volvo Electronics

Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!

Volvo V70 2008 w/3.2 non turbo

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

Post Reply
EddieW2017
Posts: 4
Joined: Fri Nov 22, 2019 12:36 pm
Year and Model: 2008 V70
Location: Pittsburgh, PA

Volvo V70 2008 w/3.2 non turbo

Post by EddieW2017 »

Question, recently my 2008 v70 with a 3.2 left me on the side of the road with the Battery light lit on the dash and the car just stopped. After I got it back home and with some research and a new battery I found out that the BOLT holding on the Alternator gear came loose. I replaced the Gear and Bolt from FCP euro and used Locktite when I installed the new parts.
So the issue I'm having is during the re-assembly of the Intake manifold I must have broken the tab on one of the connectors to the Intake Manifold. I am not too sure what the connector actually connects into but it is located about midway up on the RIGHT (passenger side) of the intake manifold and is easier to access from under the car. I will attach a photo if I can. The wires are OK, it's just the back plastic connector part that snaps and holds the wires in place. ANYONE know if or how I can get a replacement one? I don't want to tape or ?
Attachments
20191122_142439.jpg
User avatar
Rattnalle
Posts: 1674
Joined: Fri Sep 01, 2017 2:10 am
Year and Model: 2004 V70 2.5T
Location: Sweden
Has thanked: 20 times
Been thanked: 124 times

Re: Volvo V70 2008 w/3.2 non turbo

Post by Rattnalle »

I'd just tape it together, works just as well.

But you're in the wrong subforum I think, that's a P3 V70. The 3.2 wasn't around on the P2 platform.
Post Reply
  • Similar Topics
    Replies
    Views
    Last post