IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

2005 XC90 Random engine stumble P0101 P0102 [delphi MAF OBQ] Topic is solved

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo XC90s. The XC90 proved to be very popular, and very good for Volvo's sales numbers, since its introduction in model year 2003 (North America).
mheller31
Posts: 4
Joined: Fri Nov 22, 2019 7:05 pm
Year and Model: 2005 XC90
Location: PA
Has thanked: 2 times
Been thanked: 0
United States of America
mheller31

2005 XC90 Random engine stumble P0101 P0102 [delphi MAF OBQ]

Post by mheller31 » Fri Nov 22, 2019 7:15 pm

Hello,

I have a 2005 XC90 with 2.5 engine. I have replaced the throttle body and MAF also fuel filter and fuel pressure sensor. The car runs great except that it is still throwing codes p0101 and p0102. On occasion it stumbles and once every 30 or 40 miles it will stall. Should I be checking the head gasket or any ideas? I would appreciate any feed back. Thanks!



User avatar
SuperHerman
Posts: 1245
Joined: Mon Dec 01, 2014 1:28 pm
Year and Model: 2004 & 2016 XC90
Location: Minnesota
Has thanked: 0
Been thanked: 118 times
United States of America
SuperHerman

Re: Random engine stumble

Post by SuperHerman » Sat Nov 23, 2019 8:17 pm

Did you use an OE MAF?

Check for air leaks in the various vacuum lines.

Do a glove test to see the health of your PVC system.
These users thanked the author SuperHerman for the post:
mheller31



User avatar
RickHaleParker
Posts: 3211
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 374 times
United States of America
RickHaleParker

Re: Random engine stumble

Post by RickHaleParker » Sat Nov 23, 2019 9:08 pm

Clean the MAF connector and test for Air leaks in the intake system.

P0101 Possible source
Air leakage in the intake system
Contact resistance or oxidation in the mass air flow (MAF) connectors
Damaged mass air flow (MAF) sensor.

Blocked intake system

P0102 Possible source
Air leakage in the intake system
Contact resistance in the mass air flow (MAF) sensor connectors
Damaged mass air flow (MAF) sensor.

Short-circuit to ground in the signal cable
Open-circuit in the signal cable
Open-circuit in the power supply
These users thanked the author RickHaleParker for the post:
mheller31


Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.

Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.

Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0,
Plant Torslanda Sweden.
----------------------------------------------------------------
1997 S90, B6304S, AW30-42, Bosch Motronic 4.4 - Sold

mheller31
Posts: 4
Joined: Fri Nov 22, 2019 7:05 pm
Year and Model: 2005 XC90
Location: PA
Has thanked: 2 times
Been thanked: 0
United States of America
mheller31

Re: Random engine stumble

Post by mheller31 » Mon Nov 25, 2019 6:55 am

Thanks for the advice! I will start checking these things out. One quick question, I used a Delphi MAF. I am thinking maybe I should try an OEM? It ran great for over a year after replacing it. It is a really strange problem, because the car runs great except a random stumble. I have narrowed it down to about once every 25 miles of driving or so.



cn90
Posts: 6595
Joined: Wed Mar 31, 2010 9:54 am
Year and Model: 2004 V70 2.5T
Location: Omaha NE
Has thanked: 0
Been thanked: 110 times
United States of America
cn90

Re: Random engine stumble

Post by cn90 » Mon Nov 25, 2019 7:50 am

- How many miles?
- MAF: Bosch only.


2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+

mheller31
Posts: 4
Joined: Fri Nov 22, 2019 7:05 pm
Year and Model: 2005 XC90
Location: PA
Has thanked: 2 times
Been thanked: 0
United States of America
mheller31

Re: Random engine stumble

Post by mheller31 » Mon Nov 25, 2019 10:02 am

I have 160,000 miles on it. I am thinking I should get a MAF from Bosch. The Delphi one I installed was on sale...stupid decision. All the other parts I have replaced are OE. Won't do that again.



mheller31
Posts: 4
Joined: Fri Nov 22, 2019 7:05 pm
Year and Model: 2005 XC90
Location: PA
Has thanked: 2 times
Been thanked: 0
United States of America
mheller31

Re: Random engine stumble

Post by mheller31 » Fri Dec 06, 2019 7:43 pm

I would just like to say thanks for all the help! I would also like to say if you get codes for a MAF (P0101, P0102) get OE! I bought a Delphi and even though it was not cheap I have been battling these codes for almost a year. I kept thinking it could not be the MAF because it is new. I took it back to the store telling them it was defective and put in the OE Bosch and no more codes. Before I could only drive a couple miles before the CEL would come on. It would stumble every 20 or 30 miles, but recently got worse. I have driven almost 40 miles now with no CEL. I am hoping that it is fixed. Keep you posted!



User avatar
abscate
MVS Moderator
Posts: 19180
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 229 times
Been thanked: 759 times
Trinidad & Tobago
abscate

Re: 2005 XC90 Random engine stumble P0101 P0102 [delphi MAF OBQ]  Topic is solved

Post by abscate » Sun Dec 08, 2019 6:29 pm

Added info and solution to title . Green checked it


Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW
Link to Maintenance record thread
Link To Volvo Glossary

Post Reply
  • Similar Topics
    Replies
    Views
    Last post