IPD sale XeMODeX - Experts in Volvo Electronics

Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!

Stupid Immobilizer see manual

Help, Advice, Owners' Discussion and DIY Tutorials devoted to the second generation C70, S40 and V50 Volvos -- awkwardly model year 2004 ½ onwards -- plus where to go for advice and discussion on Volvo's sporty C30 Coupe powered by Volvo's ubiquitous inline 5-cylinder power plant.
Post Reply
Brokens40
Posts: 2
Joined: Thu Dec 12, 2019 10:13 am
Year and Model: 2005 s40
Location: Pennsylvania

Stupid Immobilizer see manual

Post by Brokens40 »

:oops:
Hi, I have a 2005 s40 turbo AWD.
I bought it not running. Mistake. It has the immobilizer message. I can't get a scan tool or Vida to read the car. I tested the CAN system to the Cem. It reads 60 ohms. I can't remember from working on other can systems. .. should it be 120 ohms ? Can someone please test their system at the OBD plug with an ohm meter ?
User avatar
yagger
Posts: 318
Joined: Thu Mar 24, 2016 4:29 pm
Year and Model: S60 2005 2,5T
Location: DreamLand
Has thanked: 6 times
Been thanked: 25 times

Re: Stupid Immobilizer see manual

Post by yagger »

Without DiCE, I do not think you can get some useful info from that car.
User avatar
RickHaleParker
Posts: 4712
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 604 times

Re: Stupid Immobilizer see manual

Post by RickHaleParker »

Brokens40 wrote: Thu Dec 12, 2019 10:20 am I can't remember from working on other can systems. .. should it be 120 ohms ?
CAN has two 120Ω, one at each end. 1/ ( 1/120Ω + 1/120Ω) = 60Ω.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD.
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
Brokens40
Posts: 2
Joined: Thu Dec 12, 2019 10:13 am
Year and Model: 2005 s40
Location: Pennsylvania

Re: Stupid Immobilizer see manual

Post by Brokens40 »

I do have Vida dice. i got the program working on a laptop on a VM... it recognizes the dice tool.... but will not read the car, it gives me the
"not possible to read out information....."
i'm trying to figure that out right now. i've installed the program with no internet on, firewalls down, ect....
anyone fix this issue ?
User avatar
yagger
Posts: 318
Joined: Thu Mar 24, 2016 4:29 pm
Year and Model: S60 2005 2,5T
Location: DreamLand
Has thanked: 6 times
Been thanked: 25 times

Re: Stupid Immobilizer see manual

Post by yagger »

Lets try. ) Do you have a skype?
User avatar
RickHaleParker
Posts: 4712
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 604 times

Re: Stupid Immobilizer see manual

Post by RickHaleParker »

Brokens40 wrote: Sun Jan 26, 2020 7:13 pm i got the program working on a laptop on a VM... it recognizes the dice tool.... but will not read the car, it gives me the
"not possible to read out information....."
Check your VM configuration and and make sure USB 2.X is installed in the VM.

Some VMs do not support USB 2.X by default, you need to add USB 2.X support to the configuration.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD.
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
Post Reply
  • Similar Topics
    Replies
    Views
    Last post