IPD sale XeMODeX - Experts in Volvo Electronics Free shipping all USA - Experts in Brakes
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

removal of sepentine belt 2009 s60

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

volvomadness
Posts: 108
Joined: Wed Sep 02, 2009 6:12 pm
Year and Model: v70 2003
Location: new york
Has thanked: 0
Been thanked: 3 times
volvomadness

removal of sepentine belt 2009 s60

Post by volvomadness » Mon Dec 23, 2019 4:45 pm

Trying to removal the serpentine belt of 2009 s60. I have done these on 2005 and lower but not on a 2009. Don't see where to put the tool in for the tensioner, Is there a plastic cover on the tensioner?

If so how do it get the cover off

Thanks Madness

User avatar
vtl
Posts: 1749
Joined: Thu Aug 16, 2012 1:35 pm
Year and Model: 2005 XC70
Location: Boston
Has thanked: 3 times
Been thanked: 50 times
United States of America
vtl

Re: removal of sepentine belt 2009 s60

Post by vtl » Mon Dec 23, 2019 5:18 pm

It can be either torx hole or the hex nut on the bearing. I've had both types of tensioners.
05 XC70 260k, 16 XC60 40k, 19 Tundra 1k

User avatar
oragex
Posts: 4616
Joined: Fri May 24, 2013 6:20 am
Year and Model: S60 2003
Location: Canada
Has thanked: 92 times
Been thanked: 233 times
Contact:
Canada
oragex

Re: removal of sepentine belt 2009 s60

Post by oragex » Mon Dec 23, 2019 6:41 pm

If there's a black plastic cover, put against its side a long flat screw driver then give it a small smack with your fist (I've simply used a long piece of pipe), it should jump off & no need to put it back. If you're going for the hex bolt, you need a ratchet slim enough to fit by the car frame. For the tension, you'll need a long handle, an extendable ratchet is the best - also toss the power steering reservoir - if you also lift the coolant reservoir, undo first the electrical connector underneath or it may damage the level sensor

User avatar
RickHaleParker
Posts: 3643
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 448 times
United States of America
RickHaleParker

Re: removal of sepentine belt 2009 s60

Post by RickHaleParker » Mon Dec 23, 2019 10:34 pm

09S60Sepentine.jpeg
09S60Sepentine.jpeg (60.85 KiB) Viewed 11 times

OR

09S60Sepentine2.jpeg
09S60Sepentine2.jpeg (53.2 KiB) Viewed 11 times
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.

Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.

Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0,
Plant Torslanda Sweden.
----------------------------------------------------------------
1997 S90, B6304S, AW30-42, Bosch Motronic 4.4 - Sold

Post Reply
  • Similar Topics
    Replies
    Views
    Last post