IPD sale XeMODeX - Experts in Volvo Electronics Free shipping all USA - Experts in Brakes
I'll be performing maintenance on the server March 31. I'll try my best to make interruptions as painless as possible. Thanks for your understanding.
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

pilot bearing won't fit

All the classics... pre-1975 Volvos.
jrv6a
Posts: 1
Joined: Fri Dec 27, 2019 4:44 pm
Year and Model: 1973 145
Location: Florida
Has thanked: 0
Been thanked: 0
United States of America
jrv6a

pilot bearing won't fit

Post by jrv6a » Fri Dec 27, 2019 4:46 pm

QUESTION: are there different size pilot bearings for the 1973 145? Or do automatic cars have a sleeve in the crank?

I don't see very well, so if the answer is obvious, take it easy on me because I'm working more by feel than by sight. I'm swapping out the BW35 and replacing it with M40 in my 1973 145. The pilot bearing I got with the clutch kit does not fit inside the crank. I can't see if there is a sleeve inside the back of the crank for the auto input shaft, but it feels like there is. I tried using a pick, but I had no luck. If there is a sleeve, it's too thin to use the old bread trick to remove it.

The OD of the bearing I have is 1.378in, and it's too big.

jimmy57
Posts: 6549
Joined: Fri Nov 12, 2010 9:25 am
Year and Model: 2004 V70R GT, et al
Location: Ponder Texas
Has thanked: 3 times
Been thanked: 231 times
jimmy57

Re: pilot bearing won't fit

Post by jimmy57 » Fri Dec 27, 2019 8:40 pm

There is a sleeve as I recall. Find the socket that fits into it with least clearance. Stick an extension in that socket but backwards if it fits, i.e., not with the hex hollow end first. Pack the sleeve through the hole with grease. Use a grease gun to pump it full if you have it of use finger if not. Now put the socket and extension in the hole in sleeve and bang it with hammer. The pressure from grease will push the sleeve out. If the socket is not a close fit the grease will leak there without building pressure so find the one that is snug. Different brands will have different outside diameter for the same socket size so sort until you find that one that is best.

User avatar
alschnertz
Posts: 613
Joined: Fri Apr 29, 2011 9:25 am
Year and Model: 1995 854T
Location: Connecticut
Has thanked: 1 time
Been thanked: 8 times
United States of America
alschnertz

Re: pilot bearing won't fit

Post by alschnertz » Sat Dec 28, 2019 4:21 pm

It's been a long long time, but I too remember a bushing in the end of the crankshaft on BW35 equipped cars.
'60 PV544, '68 220, '70 145S, '86 745T, '95 854T, '01 S40
'84 Prelude
'06 MPV
'13 Ford Focus SE

User avatar
93Regina
Posts: 2813
Joined: Sat Jan 18, 2014 7:11 pm
Year and Model: 93:240/940
Location: Sunflower State
Has thanked: 0
Been thanked: 58 times
93Regina

Re: pilot bearing won't fit

Post by 93Regina » Fri Jan 03, 2020 9:48 am

For a bearing

How to remove a clutch pilot bearing without a puller! Grease / Bread / Paper trick!


Post Reply
  • Similar Topics
    Replies
    Views
    Last post