IPD sale XeMODeX - Experts in Volvo Electronics Free shipping all USA - Experts in Brakes
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

Turn Signal Issue

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

KentV70
Posts: 1
Joined: Sat Feb 08, 2020 12:42 pm
Year and Model: 2002 V70
Location: Seattle, WA
Has thanked: 2 times
Been thanked: 0
United States of America
KentV70

Turn Signal Issue

Post by KentV70 » Sat Feb 08, 2020 12:52 pm

I'm driving a 2002 Volvo V70 and I can't find a solution to my specific problem.

Right turn signals (front, side and back) failed about 1 week ago. At first, the lights were illuminated all the time without blinking.

Based on some of the discussions I'd seen, I pulled out the turn signal stalk and cleaned contacts, etc - it made no difference.

Today I replaced the hazard switch. That did not solve the problem, but now the lights will not illuminate at all.
Brake lights work and don't affect seem to affect the situation. Hazards work but only on the left side - the right side was staying solid and now stays dead.

Any ideas on what I can check next?

chris11211
Posts: 55
Joined: Tue Feb 26, 2019 4:44 pm
Year and Model: 2006 s60
Location: NY
Has thanked: 6 times
Been thanked: 10 times
United States of America
chris11211

Re: Turn Signal Issue

Post by chris11211 » Sat Feb 08, 2020 11:07 pm

Did you check the fuse?
These users thanked the author chris11211 for the post:
KentV70

ljsommar1
Posts: 27
Joined: Thu Jul 18, 2019 10:10 am
Year and Model: 2002V70
Location: Pennsylvania
Has thanked: 0
Been thanked: 3 times
United States of America
ljsommar1

Re: Turn Signal Issue

Post by ljsommar1 » Sun Feb 09, 2020 11:12 am

I would pull the lamps and either replace them or clean the contact surfaces with a pencil eraser (both the lamp and the mating socket). This frequently solves problems like this.
Hope this helps.
These users thanked the author ljsommar1 for the post:
KentV70

Post Reply
  • Similar Topics
    Replies
    Views
    Last post