IPD sale XeMODeX - Experts in Volvo Electronics Free shipping all USA - Experts in Brakes
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

2004 S60R Wheels.

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

User avatar
- Pete -
Posts: 491
Joined: Fri Dec 06, 2013 10:13 pm
Year and Model: 01, 04, 04, 04 V70's
Location: Minnesota/Wisconsin
Has thanked: 48 times
Been thanked: 64 times
United States of America
- Pete -

Re: 2004 S60R Wheels.

Post by - Pete - » Sat Mar 21, 2020 10:42 pm

RickHaleParker wrote:
Sat Mar 21, 2020 6:37 pm


Eight months ago, did you miss this or pass them over? FS - Set of 4 17x7 Arrakis Wheels - $100 - IN He might still have them.

Those (your CL find) look incredibly unbitten by curbs. Nice find Rick! Rubber's what 2-3/32"? The Al-you-min-ee-yum (& center caps) is worth $250 easy in that condition.

Have you had the front bumper skin off yet?
Just curious if everything is still there for the fogs.

IN is a bit of a hike from MN. $100 is doable though.
2001 V70XC 146k
2004 V70 AWD 139k
2004 V70R M66 143k
2004 XC70 283k
2006 XC70 155k Sold

User avatar
RickHaleParker
Posts: 3929
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 488 times
United States of America
RickHaleParker

Re: 2004 S60R Wheels.

Post by RickHaleParker » Sat Mar 21, 2020 11:43 pm

- Pete - wrote:
Sat Mar 21, 2020 10:42 pm
Those (your CL find) look incredibly unbitten by curbs. Nice find Rick! Rubber's what 2-3/32"? The Al-you-min-ee-yum (& center caps) is worth $250 easy in that condition.

Have you had the front bumper skin off yet?
Just curious if everything is still there for the fogs.

IN is a bit of a hike from MN. $100 is doable though.
Took a bobby pin measured the tread depth, got 8/32", Virgin is 10/32" will try to find my depth gauge and get a more precise measurement. The tires look like new.

I have not had the bumper off and do not know the status of the fog light hardware. I can get fog lights at the local LKQ for $10.00 each. Last time I got two Fog lights for the C70 left the hardware attached on got charged $20.00 total. That is a whole lot better the the $240.00 a pair online for used. My C70 has the rare round fog lights.

There are way to ship wheels cheap. You just need to know how the carrier's system works, how to pack them, what to say and what not to say. If you poke around you can find the howto online.
--------
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.
Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
Platform P2 2004 S60R, B2524T4, AW50/51 AWD, Bosch Motronic 7.0, BorgWarner K24 turbocharger, Plant Ghent Belgium.

User avatar
- Pete -
Posts: 491
Joined: Fri Dec 06, 2013 10:13 pm
Year and Model: 01, 04, 04, 04 V70's
Location: Minnesota/Wisconsin
Has thanked: 48 times
Been thanked: 64 times
United States of America
- Pete -

Re: 2004 S60R Wheels.

Post by - Pete - » Sat Mar 21, 2020 11:53 pm

If you have a hard time coming up with R projector fogs let me know.
2001 V70XC 146k
2004 V70 AWD 139k
2004 V70R M66 143k
2004 XC70 283k
2006 XC70 155k Sold

User avatar
RickHaleParker
Posts: 3929
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 488 times
United States of America
RickHaleParker

Re: 2004 S60R Wheels.

Post by RickHaleParker » Sun Mar 22, 2020 12:24 am

- Pete - wrote:
Sat Mar 21, 2020 11:53 pm
If you have a hard time coming up with R projector fogs let me know.
Getting the motor sorted out is next on the list.

The 2004 - 2007 S60R / V70R fog lights looks like the same fog lights that my '98 C70 has but different mounting brackets. I had to go all the way to Oklahoma City to get the last pair.
Last edited by RickHaleParker on Sun Mar 22, 2020 12:37 am, edited 1 time in total.
--------
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.
Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
Platform P2 2004 S60R, B2524T4, AW50/51 AWD, Bosch Motronic 7.0, BorgWarner K24 turbocharger, Plant Ghent Belgium.

User avatar
- Pete -
Posts: 491
Joined: Fri Dec 06, 2013 10:13 pm
Year and Model: 01, 04, 04, 04 V70's
Location: Minnesota/Wisconsin
Has thanked: 48 times
Been thanked: 64 times
United States of America
- Pete -

Re: 2004 S60R Wheels.

Post by - Pete - » Sun Mar 22, 2020 12:32 am

So it was a roller in other words?
I was curious why the rotors were still so rusty.

My fogs are complete w/brackets. Lenses could use some clay & elbow grease. The stock fogs aren’t great, but better than nothing. I replaced my entire units, brackets & projectors w/PIAA led.
2001 V70XC 146k
2004 V70 AWD 139k
2004 V70R M66 143k
2004 XC70 283k
2006 XC70 155k Sold

User avatar
RickHaleParker
Posts: 3929
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 488 times
United States of America
RickHaleParker

Re: 2004 S60R Wheels.

Post by RickHaleParker » Sun Mar 22, 2020 12:58 am

- Pete - wrote:
Sun Mar 22, 2020 12:32 am
So it was a roller in other words?
I was curious why the rotors were still so rusty.

My fogs are complete w/brackets. Lenses could use some clay & elbow grease. The stock fogs aren’t great, but better than nothing. I replaced my entire units, brackets & projectors w/PIAA led.
It is a $500.00 mechanics special. It has been sitting for some time. Everything is pointing toward upper end work. Antifreeze in oil pan, multiple cylinders and charged air pipe. It does have the Atacama interior.

I use wet and dry 2500 - 3000 sandpaper then clear coat the lenses. The trick to sanding is to keep it wet, wash periodically and sand in a circular motion. If you got deep scratches make a paste out of Cerium Oxide and apply with a buffer.

You got the IPD PIAA upgrade?
--------
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.
Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
Platform P2 2004 S60R, B2524T4, AW50/51 AWD, Bosch Motronic 7.0, BorgWarner K24 turbocharger, Plant Ghent Belgium.

User avatar
- Pete -
Posts: 491
Joined: Fri Dec 06, 2013 10:13 pm
Year and Model: 01, 04, 04, 04 V70's
Location: Minnesota/Wisconsin
Has thanked: 48 times
Been thanked: 64 times
United States of America
- Pete -

Re: 2004 S60R Wheels.

Post by - Pete - » Sun Mar 22, 2020 8:11 am

Nice, they aren’t scratched, just pitted as usual from road debris.

I did a dual LED fog setup. I got the IPD kit for the original fog holes in “driving beam 6000k” when it was on clearance. I watched the price forever it seemed! I have the euro style grills, so I made spots/plates for a second pair of fogs & installed them (in “fog beam 6000k”) to more fully illuminate the road immediately in front of the car.

Expensive, yes, but the light output at night is really what I was after. I am still unsure if I like the look of it, but I forget about that when I’m driving at night (rare). My CEM is also set so my fogs stay on with high beams.

9E8ECD34-71CC-429B-9A53-5B0C3C186165.jpeg
9E8ECD34-71CC-429B-9A53-5B0C3C186165.jpeg (82.15 KiB) Viewed 45 times
91E11AAB-ACB5-413D-A9AA-D73E9007E97D.jpeg
91E11AAB-ACB5-413D-A9AA-D73E9007E97D.jpeg (156.41 KiB) Viewed 45 times
2001 V70XC 146k
2004 V70 AWD 139k
2004 V70R M66 143k
2004 XC70 283k
2006 XC70 155k Sold

User avatar
RickHaleParker
Posts: 3929
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 488 times
United States of America
RickHaleParker

Re: 2004 S60R Wheels.

Post by RickHaleParker » Mon Mar 23, 2020 12:35 am

From another MVS post. 2004 V70R. Wheels are 17" Konig Oversteer .

Image
Image
--------
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.
Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
Platform P2 2004 S60R, B2524T4, AW50/51 AWD, Bosch Motronic 7.0, BorgWarner K24 turbocharger, Plant Ghent Belgium.

User avatar
RickHaleParker
Posts: 3929
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 488 times
United States of America
RickHaleParker

Re: 2004 S60R Wheels.

Post by RickHaleParker » Mon Mar 23, 2020 3:47 pm

- Pete - wrote:
Sat Mar 21, 2020 10:42 pm
Just curious if everything is still there for the fogs.
Left fog light grill is missing look in, felt around could not find any mounting hardware.
Popped the right grill out, same results as the left.
--------
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.
Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
Platform P2 2004 S60R, B2524T4, AW50/51 AWD, Bosch Motronic 7.0, BorgWarner K24 turbocharger, Plant Ghent Belgium.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post