IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

2005 V70 AWD 2.5t ECM 951C ... idle speed control. Signal too high

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

Duncx
Posts: 14
Joined: Tue Aug 18, 2015 6:36 pm
Year and Model: V60 2005
Location: Ottawa, Canada
Has thanked: 0
Been thanked: 0
Duncx

2005 V70 AWD 2.5t ECM 951C ... idle speed control. Signal too high

Post by Duncx » Fri Mar 27, 2020 12:28 pm

Just replaced the throttle body with a new aftermarket part as had P2111 error code and had entered limpo mode.

Now I am getting "ECM 951C ... idle speed control. Signal too high" and car is idling around 1200-1500rpm.

I have checked the throttle adaptation and used the key position II for 30 seconds and then off for 5 seconds to get the TB to re-adapt. Still the same issue :(

p.s. I have a VIDA/DICE unit.

Any ideas?

Thanks, Duncan

  • Similar Topics
    Replies
    Views
    Last post