IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

M58 collar sleeve outer sealing ring part#

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

User avatar
Posts: 177
Joined: Fri Mar 06, 2020 6:25 am
Year and Model: 2001 v70xc
Location: australia
Has thanked: 3 times
Been thanked: 7 times

M58 collar sleeve outer sealing ring part#

Post by darrylrobert » Tue Apr 28, 2020 1:16 am

I purchased my AWD shaft collar/sleeve about 2 years ago and its been sitting on the shelf rusting (literally) . Reason ive been putting it off is i had a really hard time removing the collar on my (practice) junked car, i removed the fender to lever/pull against the car body.

REAR wheels are dead, driveshaft rotates so VCoupling is working. All wheels up there is a clicking noise coming from angle gear area.

I bought the sleeve on its own , i should of got the kit...now i need the seals

According to other forums Volvo has two seals 9143911 listed for the same part number new part and old part are different in size, so it looks like a seamless replacement job old part off new part on is looking very unlikely.

Just to add confusion Volvo Australia insist my car has an Automatic gearbox despite there being a 3=M58 in my VIN
vin.jpg (22.78 KiB) Viewed 27 times
hopefully this surface rust is on the angle gear side and doesnt affect the gearbox oil seal..
rusty sleeve.jpg
new sleeve rust

  • Similar Topics
    Last post