Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!
Help, Advice, Owners' Discussion and DIY Tutorials on Volvo XC90s. The XC90 proved to be very popular, and very good for Volvo's sales numbers, since its introduction in model year 2003 (North America).
4 posts • Page 1 of 1
- Posts: 27
- Joined: Tue Jan 28, 2020 4:08 pm
- Year and Model: 2004 xc90
- Location: Kentucky
- Has thanked: 7 times
Hey guys. Back again. 2004 XC90 with 2.9 engine. I’ve been trying to figure out a p0017 code. My crank and cam sensors are new. The vvt solenoid is new with a new gasket. The guy I bought the car from said that he had the head shaved after a blown head gasket. The car has no torque at all. I put a new timing belt on and set the timing with the cams locked. Is it possible that the exhaust cam was installed wrong and that’s what’s causing this? Can’t that be corrected without removing the head? Thanks guys.
2004 Volvo XC90 T6 169k miles
- Similar Topics
- Last post