IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

Real Trouble E5 screw on ABS module

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

Faust
Posts: 225
Joined: Wed Jan 04, 2012 7:22 am
Year and Model: V70 2004
Location: MA
Has thanked: 8 times
Been thanked: 2 times
United States of America
Faust

Real Trouble E5 screw on ABS module

Post by Faust » Thu May 21, 2020 6:57 pm

2004 V70 NA While trying to replace the ABS module, I finally made the big mistake. Since the unit is mounted upside down, I accidently tightened one of the mounting screws. This managed to bugger the splines. Can anyone suggest a way that I can get a grip on the E5 torx screw. I know about the 5/32ds interchange, but that doesn't hold either. I have a replacement screw for the one I messed up.
2004 V70
1964 Plymouth Convert (small block)
1967 Dodge Coronet (big block)

User avatar
abscate
MVS Moderator
Posts: 21061
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 316 times
Been thanked: 979 times
Trinidad & Tobago
abscate

Re: Real Trouble E5 screw on ABS module

Post by abscate » Thu May 21, 2020 7:44 pm

You should be able to get a vice grip on it and remove.
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW
Link to Maintenance record thread
Link To Volvo Glossary

Faust
Posts: 225
Joined: Wed Jan 04, 2012 7:22 am
Year and Model: V70 2004
Location: MA
Has thanked: 8 times
Been thanked: 2 times
United States of America
Faust

Re: Real Trouble E5 screw on ABS module

Post by Faust » Fri May 22, 2020 12:36 am

The screws are centered in "reliefs" in the plastic module. No vice grips I have seen could find the area around the screws required. I am considering trying to get a grip with small wire cutters. Had the same problem in removing the module from my "parts" Volvo. I ended up having to remove the entire unit and drill out the screw. Don't want to repeat that.
2004 V70
1964 Plymouth Convert (small block)
1967 Dodge Coronet (big block)

User avatar
abscate
MVS Moderator
Posts: 21061
Joined: Sun Feb 17, 2013 5:54 pm
Year and Model: 99T5 ,99S70,2005V70
Location: NYC, ALBANY NY
Has thanked: 316 times
Been thanked: 979 times
Trinidad & Tobago
abscate

Re: Real Trouble E5 screw on ABS module

Post by abscate » Fri May 22, 2020 4:54 am

You could try JB welding the socket onto the fastener as a last resort before removing it.

Ugh. Forgot about the recess
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 BMW
Link to Maintenance record thread
Link To Volvo Glossary

cn90
Posts: 6688
Joined: Wed Mar 31, 2010 9:54 am
Year and Model: 2004 V70 2.5T
Location: Omaha NE
Has thanked: 0
Been thanked: 131 times
United States of America
cn90

Re: Real Trouble E5 screw on ABS module

Post by cn90 » Fri May 22, 2020 6:29 am

I posted the trick in P80 forum.
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+

User avatar
RickHaleParker
Posts: 4217
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 539 times
United States of America
RickHaleParker

Re: Real Trouble E5 screw on ABS module

Post by RickHaleParker » Fri May 22, 2020 2:22 pm

A Left hand drill bit with the drill in reverse will most likely will spin the bolt out. Go slow and make sure you get the bit centered so it does not snap when the bolt turns.
Last edited by RickHaleParker on Fri May 22, 2020 7:11 pm, edited 1 time in total.
--------
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.
Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
Platform P2 2004 S60R, B2524T4, AW50/51 AWD, Bosch Motronic 7.0, BorgWarner K24 turbocharger, Plant Ghent Belgium.

Faust
Posts: 225
Joined: Wed Jan 04, 2012 7:22 am
Year and Model: V70 2004
Location: MA
Has thanked: 8 times
Been thanked: 2 times
United States of America
Faust

Re: Real Trouble E5 screw on ABS module

Post by Faust » Fri May 22, 2020 2:37 pm

Thanks for the suggestion. I have the left hand drills. But, aside from being upside down, the E5 head is so small, I dcould never center it. Before I had to take the entire unit out and lock it in my drill press to even approximate center.
2004 V70
1964 Plymouth Convert (small block)
1967 Dodge Coronet (big block)

Faust
Posts: 225
Joined: Wed Jan 04, 2012 7:22 am
Year and Model: V70 2004
Location: MA
Has thanked: 8 times
Been thanked: 2 times
United States of America
Faust

Re: Real Trouble E5 screw on ABS module

Post by Faust » Fri May 22, 2020 2:49 pm

cn90 wrote:
Fri May 22, 2020 6:29 am
I posted the trick in P80 forum.
I did a search and assume it was the post about using an E6. Failing that, I will try the JB Weld suggestion. I have sockets and bolts to spare. Although before reassembly I think I will also get the bolts you suggested from ACE, why go through this twice?
2004 V70
1964 Plymouth Convert (small block)
1967 Dodge Coronet (big block)

User avatar
chris11211
Posts: 70
Joined: Tue Feb 26, 2019 4:44 pm
Year and Model: 2006 s60 2.5T
Location: Brooklyn, NY
Has thanked: 6 times
Been thanked: 11 times
United States of America
chris11211

Re: Real Trouble E5 screw on ABS module

Post by chris11211 » Sun May 24, 2020 2:03 am

try 4mm socket (or whatever mm fits it) it'll grip the same.

User avatar
darrylrobert
Posts: 180
Joined: Fri Mar 06, 2020 6:25 am
Year and Model: 2001 v70xc
Location: australia
Has thanked: 3 times
Been thanked: 7 times
Australia
darrylrobert

Re: Real Trouble E5 screw on ABS module

Post by darrylrobert » Sun May 24, 2020 2:37 am

I think you need to remove the whole unit,sorry. the copper lines are flexible so might be able to get a better angle view on the problem.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post