Hello everyone, my dog chewed up my key fob pretty good recently. Also it’s key the only key I have for the car. So, I bought a new fob off the internet. I swapped the circuit board from my original key to the new one. I can get the key to unlock/lock, and the security alarm to go off. When I go to put the fob in the dash. It saids insert car key, and will not start.
I will greatly appreciate if some can point me in the right direction. Thank you
Puppy chewed key fob. 2012 S60
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
Look inside the old case for a ID46 Transponder Chip. Make sure it gets transferred to the new case.
The PC board is the remote. The ID46 chip is the key.
ID46 Transponder Chip.
The PC board is the remote. The ID46 chip is the key.
ID46 Transponder Chip.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 2909 Views
-
Last post by jtp
-
- 4 Replies
- 1457 Views
-
Last post by RickHaleParker