Xc90 DRL query

[chrisjack]

I have been playing around with three light options in VIDA. Currently my option is set to the following:

Flexstd and DRL activated by sensor.

During the day I have no DRL and the BI-Xenons are off as well. The light knob position is 0. Turning the knob to position 12 or 1 turns on the Bi-xenons and parking lights as it should.

I checked the sensor voltage on the dash (alarm/light sensor) when I shine a torch on it during the day I see the voltage go up on the sunlight and twilight parameter which is under the CEM section in Vida.

I've tried the flexzero/flexnoll option as well which turn on the Bi-xenons/low beams. The halogens on my car function only as full beams in position 1 or flash when the light knob is in position zero, no matter what flex option I choose.

Has anyone faced this sort of thing?