If this is it is an 8 mm hex head which will make it an M4 1 mm pitch bolt

Finished the mock-up fab on my copy of the Ultra Performance rear lower chassis brace for my 854. https://turbochuckcom.ipage.com/webimages/projects/97%20Volvo%20854T5/2020/chassis%20stuff/rrlwrbracefab.jpg Also finished the install (save for bleeding) of my P2 R Brembos on the car. https://turbochu...

I could measure the coil diameter and compressed length as some kind of metric on my two 1999s

Cookeh wrote: ↑20 Aug 2020, 02:02 That's an interesting take on Rick's reply.

Judging from his reaction I think he may of intended " drop in replacement " rather interchangeable which can mean identical or very similar. This may be a failure to communicate due to use of a common language.

And keep in mind Americans, he's (probably!) not a pyro, what he calls a torch we call a flashlight!

The British language may say rubbers for rubber bands or for waterproof boots. They may also call waterproof boots wellies (short for wellingtons, which I think was a brand name. Apologies to our British cousins if I got any of this wrong. volvolugnut My good man, rubbers over here most certainly d...

You don’t need to clamp small vacuum lines, they stay on pretty well.

Small zip ties work great , though.

If you do oetikers,put an extra one on the hose so if you do have a crack, you can trim the hose end and reclamp in a jiffy.

The "EXTRA" was: - COP conversion - P2R Big brake conversion, front and rear. - Built a couple chassis stiffening braces (that are currently off for coating) Super interested in these! - How does the COP conversion work? Presumably you have to teach the ECU how to use the coils. - I love ...

Where does that U brace go , Alistair? It mounts in place of the small mid-brace under the exhaust, and goes forward to attach to the rear locations for the front subframe mounts. https://turbochuckcom.ipage.com/webimages/projects/97%20Volvo%20855/2019susp/vertbrace.jpg You can barely see it in thi...

If it is not firing It’s a fuel or ignition issue. You can have a huge vacuum leak and will still get some fire going