What happen is: When it was installed, the narrow key went into the wide slot on the cam. Somebody tighten it down and bent over the wide key which will not go into the narrow slot on the cam. When installing these one need to make sure it goes in and flat before one bolts it down. Try prying up the...

Take a Computer Safe Logic Probe and trouble shoot the DI Power Stage.

Commands to fire will show up as pluses on the DI Power Stage when the engine is cranking.

Full HD pictures, click to zoom.

I'd finish checking out the bracket/plate issue. Much more likely the no spark is still related to that, than to an unrelated second problem (like the coil or power stage). - are you sure the black circular pate is in the correct orientation now? - was the cam sensor damaged from the plate being in ...

Also I need to buy a new cam sensor cuz the one I have I figure it out somebody cut it and put it back again with black tape and when the cables are too close it doesn't want to start I don't know who did that but definitely it was the black little plate thank you A junkyard cam sensor is much, muc...