Maserati on Ice. Try asking for that in a bar.

Another test would be more of a practical nature: park with a front wheel up on a curb and test all four doors for opening/closing and catching while they do. Then test again with the sub frame installed. P80s were too flexy as they came from the factory floor. Help in this area is a good thing.

"OFF WITH HER HEAD!"

Took the 850 for a drive to warm up the oil a.jpg b.jpg Once home I removed the sump splash guard, there wasn't a single drop of oil or water on it, it was as clean as the day I fitted it 3 years ago 6.jpg Removed the sump plug and left it to drain overnight c.jpg Last oil change was 5th April 2020 ...

The big mid brace from the verts does make a difference. We have one on both of our cars. The little front V-brace can't be used on the non-vert subframe unless you add threaded inserts to the front to mount it. If you see one of the big braces in the yard, it's usually not a waste of time to grab i...

Very nice garage ! I haven't seen actual 1 x 's used for roof sheathing except on 100+ year old buildings. Plywood or OSB is the standard on this side of the pond. Is that typical for over there ? Thank you. Yes the norm here is plywood or OSB board but it has its problems when nailing slates into ...

I replaced all the hoses on my '97 855 to reduce the chances of sudden coolant loss while out and about, potentially leading to engine failure.

"Barn find" auction. A wildly random list - 230 cars, some very interesting and collectable.

https://www.classiccar-auctions.com/palmen

454cid - I only have grey dash parts. The only tan one I had went out in a wagon that I put together as a driver for an old friend because she needed a car. It will come back to me when it dies but I hope it serves her needs for a couple of years. Anything else pops up I'll keep you in mind. Clemens...

The bolts I pulled are the same as the others I have from other cars in my stash. Not 100% convinced of the 2 different bolt lengths. I'm probably wrong! Took all of the bolts too. I was thinking that I might buy two new ones for the main subframe attachment because those heads took some hits when ...