Here, who has 6 byte code, CEM from MY2006- and DICE-206751 absoloutly FREE...
Reads your cems complete flash in a few seconds...

https://filetransfer.io/data-package/bsTYjdGO#link

Hello, Im sorry there's way too many pages to catch up on, I've probably only been through 40. Is there anyway to CEM pin crack with software only? I have a 2007 XC70. I have a Dice cable, a regular USB to OBD cable and a laptop with Vida. Im not super fluent with the super techy stuff thats been p...

This works on all CEMs to MY 2004, 10th place of VIN Y, 1, 2, 3 or 4. Read cem by arduino once, place it back into car and change how often you like by dice. screenshot.2 CEM tool.jpg Read CEM by arduino nano or UNO by this: #define BKPT 4 #define RESET 5 #define FREEZE 6 #define DSI 7 #define DSO 8...

CEM Data Manager.jpg I made this long ago for my self. It works, for me and i hope for anyone who needs it to copy his own CEM. For just changing config, better take the other tool and write only the config to your cem by dice... https://www.matthewsvolvosite.com/forums/viewtopic.php?t=85611&st...

@Dudde I found a Magneti Marelli ETM002-01 1ALC913CC in my garage with an OBD connector attached, so I have probably read it before sometime. Now I am reading from 0-10000 to see what I get. I don't know what kind of CPU is inside, but it looks like there are interrupt vectors from address 0. Readin...

And I am happy to share news, the Dumper I wrote for Denso dumps 256kb of external maps in around 15s, but there is room for improvement and between 10 and 11 bytes could be sent per CAN message and thus save a few more seconds.

You need go another way if you want add used remote in UEM. This way only good if you get UEM + remotes as you already noticed SEED Key is rolling one. You need program they remote itself if want make it as a new specially when UEM is missing or sniff it all via radio. Can you tell me more? You can...

Question for everyone. What info do you know is stored in the CEM? For now I know where VIN, Keys, Crypt Key, ECM Sync and PIN is. I am making a tool to make it easy to change any of these elements when you already have a CEM dump. The tool is also able to sync ECM and CEM. Currently this is only fo...

It has been a long while, but here is an updated IDB of Denso reverse engineering progress. It contains the memory map stitched as seen by the ECU, as well as 1000 named functions/variables/items. Some may be wrongly named, some have a question mark meaning I am unsure. The RE was done on software v...