Sure... The plug behind the blank switch and another plug to the right. Top row of pins counting from left to right pin 4 was bent into pin 3 on two of those male connectors. Thing is, those were never in use, but it is a three owner car.

I scored at the Pick a Part the other day. 2 sets of VVT’s for my P2 S60 for $25. This set is the best. Axial play 1.7mm, look nice as well. I know my exhaust hub is easily more that double that. I’m getting some oil leakage. I replaced my harmonic balancer and crank seal a couple weeks ago. I’ll ge...

I don’t have the screw on fittings, but if you check out the lower coupling video that Oragex posted in my “am I crazy” thread it opens up a whole new avenue of access from above that might help you get that screwed back in.

Pentosin CHF 202 and 11s are compatible, can be mixed. Also, for the few parts that I needed right away my Volvo dealer would match or come real close to the discounted prices on the Volvo parts web store. You just have to ask and act like you don’t need it that day. Lol

Here are the capacities from my owners manual. I keep these pics on my phone. Power steering is .9 Liters.

After almost a year of general and much needed maintenance, I finally did something cosmetic. I picked up a set of toasty Echo rims at a pick a part a few weeks ago and refinished them. I got my Michelin’s mounted on them last night. I’m going to scuff them after they cure and hit them with a couple...

Thanks for the info in this thread. I started getting a BCM-0070 this weekend after the car got hot, but only upon starting again after parking for a few minutes. No other errors. I pulled an ABS pump from a 06 S60 on the way home today and swapped it out with the goal of taking mine apart to take a...

I wanted to follow up here as well regarding the banjo bolt. Mine was the old style when I did my PCV job last summer. I cleaned it out with carb cleaner and didn’t think twice until I saw what it could potentially do if the pin and ball came out. I was already getting prepared to replace my alterna...

I have a 140 amp Bosch alternator off my ‘07 S60. It squeaks a little on cold start and works fine. What I thought was a bearing noise turned out to be a bent fin. I straightened it, so all it does is squeak some. The pulley bolt is stripped so the pulley can’t be replaced. It won’t last forever, bu...

I got my shirt today. Looks great!!